Easy Steps to Remove a Moen Tub Faucet
If your Moen tub faucet is becoming a hassle, maybe it's time for a replacement. Removing an old faucet can seem intimidating, but with the right guidance, it's a manageable DIY task. This step-by-step guide will walk you through how to remove a Moen tub faucet, ensuring a smooth process with minimal mess.
Before you start, gather your tools: channel locks or adjustable wrenches, an Allen wrench (depending on your faucet model), a screwdriver, frustration-free plumber's putty remover, and some old towels for easy cleanup. Having the right tools at your disposal will make the job much easier.
Preparing Your Workspace
The first step in removing any faucet is turning off the water supply. Locate the water valves under your sink and turn them clockwise to shut off the cold and hot water. If your faucet has separate handles, you'll also want to turn those to make sure no water drips while you work.
Next, disassemble as much of the faucet as you can from above. You might be able to remove the handles, escutcheons (the decorative bases of the handles), and the cap or plate that covers the top of the stem. This will give you better access to the faucet's internal parts and make your removal process smoother.
Preparing the Stem and Remove Water Supply Lines
With the faucet disassembled, you'll see the stem, the main body of the faucet that goes through the holes in your tub deck. Some stems unscrew by hand, but others require an Allen wrench or a screwdriver. Remember to keep track of how you remove it so you can reinstall your new faucet correctly.
Once the stem is removed, you'll see the water supply lines (inlets) that connect to the faucet. You can usually unscrew these by hand or with adjustable wrenches. Be careful not to damage the supply lines as you remove them, and have some rags handy to catch any leftover water.
Removing the Escutcheons and Nuts
The escutcheons are the decorative covers around the faucet stems. They can often be pried off using a flathead screwdriver or a putty knife. Once removed, you'll see a nut securing the faucet to the tub deck. You can usually unscrew this nut by hand or with channel locks.
Remember to check beneath the nut for any plumber's putty residue. If there is, use your plumber's putty remover to clean it off. This will ensure a better seal when you install your new faucet.
Removing the Faucet Body
With the nut and escutcheons removed, and the water supply lines disconnected, the faucet should now be loose enough to pull out. You might need to use a wrench to grab the faucet body and twist it counterclockwise while gently pulling up.
If the faucet is still stuck, you can try using penetrating oil to loosen any corrosion. Once you've removing the faucet, inspect the faucet holes in your tub deck for any damage or debris. Gently clean them out with a rag and water to prepare them for your new faucet.
Inspecting Your New Faucet
Before installing your new faucet, take some time to inspect it. Make sure all the parts are included and in good working order. Check that the stem is the correct length to fit through your tub deck. If necessary, you can trim it using a hacksaw or ask Moen's customer service for advice.
Also, ensure that the new faucet's mounting hardware (nuts, bushing, or washers) is included and compatible with your tub's mounting system. If anything seems amiss, do not hesitate to contact Moen or the store where you bought the faucet for assistance.
Preparing for Installation
Before installing your new faucet, apply a layer of plumber's putty around the mounting area in the tub deck. This will create a waterproof seal and prevent leaks once the faucet is secured. Be careful not to get putty on the threads of the faucet or the water supply lines.
With the putty applied, insert the faucet's lower body through the tub deck from below. Push it up through the hole until the stem is fully visible on the top. Once the faucet is in place, you can start assembling the rest of the faucet and connecting the water supply lines.
Congratulations! You've successfully removed your old Moen tub faucet and prepared your tub for a new one. The next step is installing your new faucet, which follows a similar process but in reverse. If you have any doubts, don't hesitate to consult Moen's support resources or a local plumber for professional advice.