how to remove kohler kitchen faucet

Easy Steps to Remove Your Kohler Kitchen Faucet

By Richard Hernandez
AD

Experiencing a leaky or worn-out Kohler kitchen faucet? Replacing it isn't as daunting as it seems. With the right tools and guidance, you can remove your old faucet and install a new one with ease. Here's a step-by-step guide to help you through the process.

Before you begin, gather your tools: adjustable wrench, flathead screwdriver, basin wrench, pipe joint compound, and a new Kohler kitchen faucet. Ensure you have a few towels or a bucket to catch any water spills. Lastly, always remember to turn off both the hot and cold water supplies.

Preparation and Assessment

Start by turning off the water supply. Locate the valves under your sink and turn them clockwise until they stop. To be extra cautious, turn on the faucet to release any remaining water pressure.

AD
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
Kohler Faucet Flow Restrictor Removal (Get Better Water Flow Instantly!)
Kohler Faucet Flow Restrictor Removal (Get Better Water Flow Instantly!)
How to Remove Kitchen Faucet in 4 Easy Steps - MaterialSix.com
How to Remove Kitchen Faucet in 4 Easy Steps - MaterialSix.com

Next, disconnect the water supply lines. Using a basin wrench, loosen and remove the nuts securing the supply lines to the faucet. Pull the lines away from the faucet, ensuring no debris or old plumber's putty is left behind.

Removing the Faucet Handle and Base

Begin by unscrewing the faucet handle. Depending on your faucet's design, this might require a flathead screwdriver or an Allen wrench. Once loosened, gently pull the handle off.

How To Fix A Leaky Double-Handle Kitchen Faucet?
How To Fix A Leaky Double-Handle Kitchen Faucet?
How To Remove Flow Restrictor From The Kitchen Faucet?
How To Remove Flow Restrictor From The Kitchen Faucet?

After removing the handle, identify the faucet base mounting nut. It's typically located under the sink, at the base of the faucet. Use an adjustable wrench to unscrew the nut and remove the faucet base. If it's stuck, try using a penetrating oil to loosen it.

Removing the Old Faucet Mount and Tailpiece

With the base removed, you should see the faucet mount—the large piece that sits in the bottom of your sink. Using a wrench, loosen and remove the nuts securing the faucet mount to the sink deck. You might need to use some force, but be careful not to damage the sink.

AD

Once the nuts are removed, you can carefully lift the faucet mount out of the sink. If it's stuck, try gently tapping it with a rubber mallet to help loosen it. With the mount removed, you should see the tailpiece—the pipe that connects the faucet to the supply lines. Use a wrench to unscrew and remove the tailpiece.

Cleaning and Prepping for the New Faucet

Now that the old faucet is removed, clean the area thoroughly. Ensure there's no old plumber's putty or debris left behind, as this can cause leaks with your new faucet.

Before installing the new faucet, double-check that the supply lines are clear and the area around the faucet hole is clean and dry. This will ensure a proper seal when you reinstall the faucet.

AD

Preparing the New Faucet

Before installing the new faucet, it's a good idea to prepare it. Wrap the new faucet's threads with pipe joint compound. This will help create a watertight seal and prevent leaks. Be sure to follow the manufacturer's instructions for your specific faucet.

Next, insert the new faucet's tailpiece through the sink hole. Ensure it's securely in place before continuing. If your new faucet comes with a new supply hose, replace the old hoses with the new ones.

Installing the New Faucet

Begin by inserting the new faucet's base into the sink hole.-thread the tailpiece through the faucet mount and secure it with the included mounting nut. Ensure the nut is tightened securely, but not overly tight, to prevent damaging the faucet.

AD

Reconnect the supply lines to the faucet. Use a basin wrench to secure the nuts, ensuring they're tight but not overly so. After everything is connected, turn the water supply valves back on and check for any leaks.

Congratulations! You've successfully removed your old Kohler kitchen faucet and installed a new one. Now, enjoy your newly improved sink and give yourself a pat on the back for a job well done. If you ever have any issues or need further clarification, don't hesitate to consult Kohler's customer support or a local professional plumber.

AD