How to Remove IKEA Drawer
Need to remove an IKEA drawer to replace it or repurpose the space? Our step-by-step guide will help you do it quickly and safely.
Before you start, ensure you have the right tools. You'll need a screwdriver, a hammer (for stubborn screws), and possibly a butter knife or flathead screwdriver to pry open tight spaces.
Preparation: Empty and Disconnect
Start by clearing the drawer of all contents. This will make it lighter and easier to handle.
Next, locate the small screws that secure the drawer to the cabinet. These are typically found at the back of the drawer, either at the top or the bottom. Use your screwdriver to remove these screws, saving them in a safe place for later use.
Handling Stubborn Screws
If any screws are too tight or stripped, try using a hammer to gently tap the screwdriver handle. This can help you gain more leverage and unscrew them.
For severely stripped screws, you may need to use a screwdriver with a larger, unconventional head, or even drill out the screw and replace it.
Unlocking the Drawer
Once the screws are removed, try pulling the drawer out slowly. If it's still stuck, carefully run a butter knife or flathead screwdriver along the rails to break any glue or paint seals.
If the drawer is still not budging, you may need to remove the cabinet door or bottom panel to access the drawer's slide mechanism. Be careful not to damage the cabinet when doing this.
Removing the Drawer: A Strategic Approach
With the screws removed and the drawer unlocked, start by pulling it out as far as it will go.
At this point, you may need to gently tilt the drawer up or down to remove it from the runners. The exact angle will depend on the design of your IKEA cabinet. Be patient and keep trying until you find the right angle.
Removing Without Breaking
To avoid breaking the drawer or damaging the cabinet, be careful not to force it. Instead, wiggle it back and forth slightly while pulling or tilting until it comes free.
If the drawer is still too tight, try cutting the slide mechanism runners with scissors or a sharp knife. This should allow you to remove the drawer without causing damage.
Handling the Drawer Front
If the drawer front is separate from the drawer itself, you'll need to remove it before removing the drawer. Locate the screws that hold the front onto the drawer box, and remove them using your screwdriver.
Once the screws are out, gently pull the front off the drawer box. If it's stuck, use a flathead screwdriver or butter knife to carefully pry it off.
Inspect and Reuse or Recycle
Now that your drawer is removed, inspect it for any damage. If it's in good condition, you can reuse it in another project, such as a storage ottoman or a repurposed pantry.
If the drawer isn't usable, or you're replacing it with a new one, make sure to recycle it responsibly. Many home improvement stores accept old furniture for recycling.
Removing an IKEA drawer might seem daunting, but with the right tools and a bit of patience, it's a manageable task. Happy DIYing! Now that you've removed your old drawer, think about the exciting possibilities for your newly emptied space.