how to remove ikea drawer front

How to Remove IKEA Drawer Front: Step-by-Step Guide

By Hannah Lewis
AD

Have you found yourself in a pickle with an IKEA drawer front that's seen better days? Don't panic, it's not a reason to buy a new piece of furniture. With a little patience and the right steps, you can learn how to remove an IKEA drawer front and replace it with a new one. Let's dive into this DIY guide to help you save time, money, and maintain the life of your beloved IKEA creation.

Before we begin, remember to gather all necessary tools such as a drill, screwdriver, new drawer front, and a tape measure. Safety first! Ensure the drawer is empty and that you're working in a well-lit, stable area.

Understanding Drawer Front Attachment

First, let's familiarize ourselves with how IKEA drawer fronts are typically attached. Most IKEA drawers use a simple and effective method with screws. Knowing this helps in understanding the removal process.

AD
How to Remove an IKEA Drawer Front | DIY IKEA Hack
How to Remove an IKEA Drawer Front | DIY IKEA Hack
{How To} Remove an IKEA Drawer Front
{How To} Remove an IKEA Drawer Front
IKEA drawer front removal & hardware fitting detail #home #howto #diy #ikea #drawer
IKEA drawer front removal & hardware fitting detail #home #howto #diy #ikea #drawer

Additionally, some drawers may have multiple types of fronts – those with just a flat panel, or those with attached handles. Don't worry; the process is slightly different but still manageable.

Preparing to Remove the Drawer Front

To start, carefully mark the center of the drawer on all four sides using a pencil. This will help you properly align the new drawer front in the next step.

Adjusting IKEA Drawer Fronts and Removal
Adjusting IKEA Drawer Fronts and Removal
The Easy Fix For Broken IKEA Drawers
The Easy Fix For Broken IKEA Drawers

Next, use your drill to make pilot holes at the marks you've created. Be sure to select the correct drill bit – usually, a 7/64” or 1/16” HSSyles drill bit will suffice. This step is crucial as it will make driving the screws into the new drawer front much easier later on.

Removing the Old Drawer Front

Now it's time to remove the old drawer front. Begin by releasing any tension on the drawer runners by partially pulling the drawer out and pushing it back in. For drawer fronts with handles, you'll need to remove these first.

AD

Using your screwdriver or drill, unscrew the drawer front from the pilot holes. If there's any glue residue or damaged wood, use a chisel or sandpaper to clean it up before installing the new front.

Getting the Right Fit

Before you install the new drawer front, it's essential to ensure it's the right size for your drawer. Use your tape measure to verify that the dimensions (width and height) match up. If needed, trim the drawer front with a saw, ensuring you maintain the original measurements.

If the new drawer front is larger than the old one, fill in the gaps with wood filler or use thin shims behind the new front to create a flush fit. Allow the filler to dry completely before sanding it smooth and priming the new front.

AD

Aligning and Attaching the New Drawer Front

Use your marked center points and pilot holes to help align the new drawer front. Place the front on the drawer box, lining up the marks and ensuring the front is plumb and level.

Drive the screws through the pilot holes and into the new front using your drill. Be sure not to overtighten the screws, as this could cause the front to warp or crack.

Adding the Finishing Touches

If your new drawer front has cutouts for handles, use the old handles as templates to mark the new location. Drill or screw the handles into place, following the manufacturer's instructions.

AD

Finally, reinstall the drawer in the cabinet or stand, ensuring it slides in smoothly and butts up against the back of the cabinet. Now step back, admire your handiwork, and revel in the joy of a job well done!

Congratulations! By following this guide, you've successfully learned how to remove an IKEA drawer front and replace it with a new one. Happy customizing, and here's to many more years of enjoying your upgraded furniture!

AD