How to Remove IKEA Drawer: Easy Steps
If you've decided to replace or upgrade your IKEA drawer, you might be wondering how to remove it smoothly. Don't worry, it's quite doable with the right steps and a little patience. Here's a comprehensive guide to help you remove your IKEA drawer like a pro.
Before we dive into the steps, ensure you have a flathead screwdriver and a drill (for the RELAXED drawer system) or a simple pull-out mechanism remover. Also, remember to disconnect any power sources if your IKEA furniture is part of a smart home setup. Safety first!
Prepare Your Workspace and Tools
Firstly, choose a well-lit, spacious workspace to make the process easier and safer. Clear the area around the furniture to give yourself enough room to maneuver. It's also a good idea to lay down a protective sheet or towel to keep your floor scratch-free.
Gather your tools: a flathead screwdriver for most drawers, and a drill or removal tool for the RELAXED system. If you're unsure which tools you need, check your IKEA furniture's assembly instructions or visit their website.
Understand Your Drawer System
IKEA uses different drawer systems, so it's crucial to understand which one you have. The most common systems are:
- Hot and Cold Press: These drawers require you to pull them out partway and then press or twist to release the catch.
- RELAXED: Drawerించబడ using a single screw at the back. To remove, you'll need to drill through the screw head.
- Pull-out Mechanism: These drawers slide out fully and usually have a tab or lever that releases when pushed or pulled.
Identifying your drawer system before you start will help you understand the removal process better.
Removing Hot and Cold Press Drawer
For hot and cold press drawers, start by pulling out the drawer halfway. Look for any catches or release mechanisms. Typically, you'll see a small button or tab on the side or at the back. Press or twist the release, then slide the drawer out completely.
Tip: If you're struggling to find the release, look at the back corners of the drawer. The release is often located there.
Removing RELAXED Drawer
RELAXED drawers are secured with a long screw at the back. To remove, first partially pull out the drawer. Locate the screw head, usually at the back top corner. Use a drill bit slightly wider than the screw head and drill through the head. This should allow you to pull the drawer out without any resistance.
Safety warning: Always wear safety glasses when drilling to protect your eyes from debris.
Removing other Drawer Types
Other drawer types, like the pull-out mechanism, should have a release tab or lever. Once you've located it, pull it to release, and slide the drawer out fully. If the drawer is stuck, try rocking the drawer gently or using a mallet to tap it and loosen the fit.
Some IKEA furniture, like the PAX wardrobes, may have sliding mechanisms. For these, you'll need to slide the drawer out fully and then unclip or release any catches at the back or sides.
Final Check and Cleanup
Before you put away your tools, double-check that your drawer is completely removed. If you're planning to reuse it, place it somewhere safe to prevent any damage. Lastly, give your workspace a good clean to ensure no small parts or debris are left behind.
Now that you know how to remove an IKEA drawer, you're ready to replace, upgrade, or repurpose it. happy renovating!