how to remove ge refrigerator door handles

Remove Ge Refrigerator Door Handles: Step-By-Step Guide

By Kevin Garcia
AD

Ge refrigerators are renowned for their durability and energy efficiency. However, over time, their door handles may show signs of wear and tear, or you might simply want to change the look of your refrigerator. Removal of these handles is a straightforward process that requires minimal tools and effort. Let's delve into the step-by-step guide on how to remove your GE refrigerator door handles.

Before we begin, it's crucial to understand that there are several types of GE refrigerator handles. Some are installed using screws, while others use a push-pin mechanism. This guide will cover both methods, ensuring that you can effectively remove your handles regardless of their type.

Removing Screw-On GE Refrigerator Door Handles

Screw-on handles are the most common type found on GE refrigerators. They are typically held in place by two or four screws located at the top and bottom of the handle.

AD
How to Remove Samsung Refrigerator Door Handles
How to Remove Samsung Refrigerator Door Handles
REMOVING and RE-INSTALLING HANDLES on a GE SIDE by SIDE Refrigerator
REMOVING and RE-INSTALLING HANDLES on a GE SIDE by SIDE Refrigerator
How To Fix Loose Handles On A GE Refrigerator - Hunker
How To Fix Loose Handles On A GE Refrigerator - Hunker

To remove these handles, follow these steps:

Preparation

Before you start, make sure to unplug your refrigerator from the power source to avoid any electrical hazards. Next, gather your tools - a screwdriver (Philips or flathead, depending on the screw type), a magnet or a small container to hold the screws, and a soft cloth or brush for cleaning.

How to Replace Your Refrigerator French Door Handles
How to Replace Your Refrigerator French Door Handles
How To Remove a Ding/Dent -PDR- From a Refrigerator Door (Samsung, LG, GE, Frigidaire, Kenmore)
How To Remove a Ding/Dent -PDR- From a Refrigerator Door (Samsung, LG, GE, Frigidaire, Kenmore)

Locate the screws at the top and bottom of the handle. Some handles might have covers hiding the screws. If that's the case, carefully pry them off using a flathead screwdriver or a plastic tool to avoid damaging the cover.

Removal of the Handle

Using the appropriate screwdriver, turn counterclockwise to remove the screws. If the screws are tight or rusted, be patient and apply gentle force to avoid stripping the screw heads or breaking them.

AD

Once all screws are removed, gently pull the handle towards you. The handle should come off easily, revealing the footpad (the plastic piece that stays on the refrigerator door). If the handle is stuck, gently wiggle it while pulling to break any suction seal.

Removing Push-Pin GE Refrigerator Door Handles

Push-pin handles are less common but can be found on some GE refrigerator models. They use a push-pin mechanism instead of screws to secure them to the door.

Removing these handles involves a different process. Here's how to do it:

AD

Locating the Push-Pins

First, locate the push-pins. They are usually hidden behind a small cap or cover at the top and bottom of the handle. Use a flathead screwdriver or a plastic tool to gently pop off the covers.

Push-pins can be tricky to spot as they blend in with the handle's color. Use a magnet or a small flashlight to help locate them. Once you've found them, note their position - they will snap back into place when you're reinserting the handle.

Removing the Push-Pins

Carefully insert a flathead screwdriver or a push-pin removal tool under the push-pin at an angle. Gently lift the push-pin out of its slot. The push-pin should pop out easily. If it's stuck or hard to remove, use a bit of force, but be careful not to break it or damage the handle.

AD

Once you've removed both push-pins, gently pull the handle towards you to remove it. The handle should come off with a little bit of wiggling. If not, continue removing it until it's completely detached from the door.

Cleaning the Footpad

After removing the handle, use a soft cloth or brush to clean the footpad. Remove any dirt, debris, or residue. This step is crucial to maintain the appearance and functionality of your refrigerator door.

If you're planning to replace the handle, ensure that the new one is compatible with your refrigerator model. Measure the space between the screw holes or push-pin slots to ensure a perfect fit.

Reinstalling the Handle

Remember, if you're keeping the same handle, make sure to keep track of the screws or push-pins and their positions. This will make reinstalling the handle much easier. If you've purchased a new handle, follow the same steps in reverse order to install it.

Tighten the screws or reinsert the push-pins until they're secure but not too tight. Test the handle gently to ensure it's installed correctly and functions smoothly.

Once you've finished, plug your refrigerator back in and admire your handiwork. Removing and reinstalling GE refrigerator door handles can give your appliance a fresh new look, making it a worthwhile project. If you encounter any difficulties, don't hesitate to consult a professional or contact GE's customer support for assistance.

AD