How to Change Refrigerator Door Handles: A Step-by-Step Guide
Tired of staring at that worn-out or broken refrigerator door handle? Fear not, for it's an easy fix that won't break the bank. Let us guide you through a simple, step-by-step process on how to change refrigerator door handles. Soon, your fridge will sport a fresh new look that's both functional and attractive.
Before you begin, ensure you have the following tools and materials on hand: new refrigerator door handles, a screwdriver compatible with your existing hardware, and maybe a friend to lend a helping hand. Now, let's dive into the process, shall we?
Preparation and Removal of Old Handles
First, unplug your refrigerator to ensure safety while working on it. Next, gather your desired new handles and any necessary hardware.
Before you start dismantling, take a moment to understand your refrigerator's door handle type. There are two main types: side-mount and European-style. Side-mount handles are typically found on American-style fridges and have screws on the inside of the door.
Removing Side-Mount Handles
Using your screwdriver, carefully remove the screws securing the old handle to the door. You might need to adjust the screwdriver's angle or use a hex key tool, depending on the handle design.
Once the screws are out, gently pull the old handle away from the door. If it doesn't budge, try using a flathead screwdriver to pry it off. Be cautious not to scratch the door's surface.
Removing European-Style Handles
European-style handles are found on French-door and some side-by-side refrigerator models. They are typically secured with screws from the inside of the door, but sometimes, the screws can be found on the top or bottom of the handle.
Similar to side-mount handles, use your screwdriver to remove the screws. If the screw holes are plugged with plastic or metal, you might need to drill them out. Be careful when drilling to prevent damaging the door's surface.
Installation of New Refrigerator Door Handles
Now that your old handles are out, it's time to install the new ones. Most modern refrigerator door handles are designed to fit standard 1.5 to 2-inch door widths, so you might not need to make any adjustments. However, always double-check before installing.
Again, the installation process might vary slightly depending on your new handle's design and your fridge's make and model. Here, we'll provide a general installation guide for both handle types:
Installing Side-Mount Handles
Align the new handle with the door's mounting holes. Ensure that the handle's edge is flush with the door's surface. If necessary, you can gently tap the handle into place using a rubber mallet.
Reinsert the screws through the handle's mounting holes and secure them using your screwdriver. Tighten the screws firmly, but be mindful not to overtighten and strip the holes or damage the handle.
Installing European-Style Handles
Position the new handle against the door, aligning it with the mounting holes. As with side-mount handles, you might need to gently tap it into place.
Thread the screws through the handle's mounting holes and secure them with your screwdriver. Tighten them firmly, but not too much, to ensure a secure fit without damaging the handle or door.
Once both handles are secured, plug your refrigerator back in and admire your handiwork. Your once-tired-looking fridge will now boast a fresh, new, and improved appearance. Congratulations on a job well done!