how to change screen on andersen storm door

Effortlessly Upgrade Your Andersen Storm Door: A Step-by-Step Guide to Changing the Screen

By Anthony Lopez
AD

Embarking on a DIY project to enhance your home's security and appeal? Changing the screen on your Andersen storm door might just be the perfect project to undertake. Not only will this update your door's look, but it will also improve your home's ventilation. Let's guide you through this simple yet rewarding process.

Before we start, gather your tools - safety glasses, flathead screwdriver, utility knife, measuring tape, and the new screen. Having these ready will make your task easier and safer.

Removing the Old Screen

Start by ensuring your storm door is securely latched and won't swing open unexpectedly. Then, don your safety glasses to protect your eyes from any debris.

AD
Replacement flat spline for Emco full view storm/screen door
Replacement flat spline for Emco full view storm/screen door
Andersen 4000 Storm Door Switch Screen to Glass Panel
Andersen 4000 Storm Door Switch Screen to Glass Panel
Replace Storm Door Glass Insert with Insect Screen | Andersen Windows
Replace Storm Door Glass Insert with Insect Screen | Andersen Windows

Using a flathead screwdriver, carefully pry off the spline - the rubber-like strip - that secures the screen to the frame. Run the screwdriver along the groove where the spline meets the frame, working your way around the entire screen.

Removing the Screen

Once you've loosened the spline, you can now pull it out using a pair of pliers or your fingers. Be careful not to tear or damage it, as you might need it for the new screen if it's the same size.

Make Your House Warmer by Adjusting the Storm Door Sweep
Make Your House Warmer by Adjusting the Storm Door Sweep
How to Repair Your Screen Door
How to Repair Your Screen Door

After the spline is out, you can remove the old screen from the frame. It should come off easily. If it's stuck, gently use a utility knife to cut along the frame and release it. Set the old screen aside - you might need it for measurements later.

Measuring for the New Screen

Before purchasing a new screen, measure the dimensions of the frame where the screen will be fitted. Use a measuring tape and measure both the length and width. It's essential to get accurate measurements to avoid buying the wrong size.

AD

If you're unsure about the measurements, take the old screen to your local hardware store as a reference. Most stores carry Andersen storm door screens, making it easy to find a perfect match.

Installing the New Screen

With the old screen removed and measurements taken, it's time to install the new one. If you bought a pre-cut screen, skip to the next step. If not, carefully cut the screen to match the measurements you took earlier using a utility knife.

Before inserting the new screen, make sure there are no sharp edges or burrs that could damage it. Trim these off if necessary.

AD

Securing the New Screen

Begin from one corner of the frame and work your way around. Insert the new screen into the frame, tucking it in as you move around the frame.

Once the screen is in place, use the spline tool (if it came with your screen kit) or a flathead screwdriver to push the spline back into the groove. Work slowly but firmly, ensuring the screen is secure and taut.

Finishing Up

After you've secured the screen around the entire frame, make sure it's smooth and properly tensioned. There shouldn't be any wrinkles or loose areas.

AD

Check your work by gently pulling on the screen in different directions. If it feels secure and there's no give, you've successfully changed your storm door screen!

Congratulations! You've just upgraded your Andersen storm door. By following these steps, you've improved your home's ventilation and added a touch of personal style. Enjoy the fruits of your labor, and remember, regular maintenance will keep your storm door looking and functioning at its best. Happy DIYing!

AD