how to remove and replace a moen shower cartridge

How to Remove and Replace a Moen Shower Cartridge

By Anthony Walker
AD

Are you dealing with a persistently leaky shower or experiencing fluctuating water pressure? Chances are, you might need to remove and replace your Moen shower cartridge. This essential component plays a crucial role in regulating water flow and temperature in your shower. Don't let the thought of a DIY project overwhelm you – with the right guidance, you can tackle this task like a pro. Here's a step-by-step guide on how to remove and replace a Moen shower cartridge.

Before we dive into the process, ensure you have the following tools and materials ready: an adjustable wrench,...

Preparing for the Replacement

Before starting, gather all necessary tools and materials. Having everything at hand will make the process smoother and less time-consuming.

AD
Your Guide to Replacing a Shower Cartridge - DIY Bathroom Improvement!
Your Guide to Replacing a Shower Cartridge - DIY Bathroom Improvement!
Moen Shower Cartridge Removal Tool
Moen Shower Cartridge Removal Tool
How to replace a Moen 1222 / 1222B shower faucet cartridge
How to replace a Moen 1222 / 1222B shower faucet cartridge

Here's a list of items you'll need:

  • Adjustable wrench
  • New Moen shower cartridge (ensure it matches your model)
  • Teflon tape
  • White lithium grease
  • Rag or cloth

Gather Your Tools

Ensure you have all the necessary tools ready. While an adjustable wrench is the primary tool required, having a second wrench for better grip and leverage can be helpful.

an old toilet is being cleaned with water hoses
an old toilet is being cleaned with water hoses
HOW TO REPAIR REMOVE REPLACE A LEAKING MOEN SHOWER FAUCET CARTRIDGE VALVE with a SINGLE KNOB 1225
HOW TO REPAIR REMOVE REPLACE A LEAKING MOEN SHOWER FAUCET CARTRIDGE VALVE with a SINGLE KNOB 1225

Also, check if you have a Moen shower handle setscrew tool or a deep socket wrench. Some Moen shower cartridges may require these specialized tools for removal.

Obtain the Correct Replacement Cartridge

Replacing your Moen shower cartridge not only requires the correct model but also the right type – single-handled or double-handled. Ensure you're purchasing the right cartridge for your shower fixture.

AD

If you're unsure, consult Moen's customer service or refer to your shower's model number, which can usually be found on the escutcheon (the metal plate around the handle).

Removing the Old Shower Cartridge

Once you've gathered your tools and obtained the correct replacement, it's time to remove the old cartridge. Follow these steps carefully to avoid any damage to the shower valve.

Having a second person to assist you can make the process easier, as several steps require both hands.

AD

Turn Off the Water Supply

Before beginning, turn off the water supply valves beneath the sink or in the basement. This crucial step prevents water from flowing into the shower and causing a mess or further water damage.

Most water supply valves are located behind the access panel beneath the sink. If you can't find the valves, consult your home's blueprint or hire a professional to locate and turn them off.

Disassemble the Shower Handle

Remove the shower handle escutcheon, which is the decorative metal plate around the handle. Use an Allen wrench to loosen the setscrew on the shower handle, and then gently pull the handle off.

AD

Next, unscrew the handle escutcheon using an adjustable wrench. Be cautious not to damage the finish. Once removed, you'll expose the experiocator, a plastic cap that houses the cartridge.

Remove the Experiocator and Cartridge

Using a flathead screwdriver or a specialized Moen removal tool, carefully pry off the experiocator cap. If you don't have the specialized tool, gently use a flathead screwdriver, taking care not to scratch the finish. The cap might be glued in place, so you may need to use some force.

With the cap removed, you'll see the old cartridge. Using an adjustable wrench, carefully unscrew the cartridge counterclockwise. If the cartridge is tightly sealed, you might need to use a second wrench for better grip.

Installing the New Shower Cartridge

With the old shower cartridge removed, it's time to install the new one. Follow these steps to ensure a successful replacement.

If you've taken photos during the disassembly process, refer to them for guidance during reassembly.

Prepare the New Cartridge

Wrap the threads of the new cartridge with Teflon tape. Start at the base of the threads and wrap clockwise, overlapping each layer by half. This helps create a watertight seal and ensures smooth operation of the cartridge.

Apply a small amount of white lithium grease to the bottom of the cartridge. This helps lubricate the O-ring and ensures proper operation of the cartridge.

Insert and Tighten the New Cartridge

Position the new cartridge into the valve body. Using an adjustable wrench, hand-tighten the cartridge clockwise until it's snug. Be careful not to overtighten, as this can strip the threads and damage the shower valve.

Once the cartridge is securely in place, replace the experiocator cap. If necessary, use a rubber mallet to gently tap it back into place. Reattach the shower handle and escutcheon, ensuring they're secure but not overly tight.

Testing the New Shower Cartridge

With the new Moen shower cartridge installed, it's time to test the shower and ensure everything is working correctly.

Slowly turn the water supply valves back on, and watch for any signs of leakage around the cartridge or the newly installed parts.

Test the Water Flow

Turn the shower handles to their full hot and cold positions. Check the water pressure and ensure it's consistent. If the water pressure fluctuates or seems inconsistent, you may need to adjust the cartridge's position or check for any obstructions within the valve body.

Final Inspection

Inspect the shower valve and ensure there are no leaks around the cartridge or the newly installed parts. If you notice any water droplets or moisture, tighten the cartridge or the escutcheon slightly, using an adjustable wrench.

Congratulations, you've successfully removed and replaced your Moen shower cartridge! You've not only saved money by tackling this project yourself but also gained valuable DIY experience. Don't forget to toss the old cartridge and any other damaged parts for proper disposal. If you encounter any issues during the process or notice any persistent leaks, don't hesitate to contact a professional plumber for help.

AD