how to replace moen shower cartridge

How to Replace a Moen Shower Cartridge: Step-by-Step Guide

By Daniel Smith
AD

Is your Moen shower giving you grief with low water pressure or persistent leaks? The culprit might be a worn-out cartridge. Replacing it is a DIY job that can save you the cost of a plumber. Here's a step-by-step guide on how to replace a Moen shower cartridge.

Before we dive in, ensure you have the right tools and parts. You'll need a cartridge removal tool, an adjustable wrench, a flathead screwdriver, the new cartridge (make sure it's a Moen genuine replacement), and some plumber's grease. Having a of a towel to catch any water drips will also be helpful.

Identifying the Cartridge Type

Moen uses different cartridge types for their showers. Knowing which one you have will help you get the right replacement.

AD
How To Replace A Single-Handle Shower Cartridge | 1-Tom-Plumber
How To Replace A Single-Handle Shower Cartridge | 1-Tom-Plumber
Your Guide to Replacing a Shower Cartridge - DIY Bathroom Improvement!
Your Guide to Replacing a Shower Cartridge - DIY Bathroom Improvement!
How to replace a Moen 1222 / 1222B shower faucet cartridge
How to replace a Moen 1222 / 1222B shower faucet cartridge

For single-handled faucets, look for a Moen 1225 or 1222 cartridge. For two-handled faucets, you might need a Moen 1100 or 1200 cartridge. If you're unsure, consult your shower's manufacturer documents or use an onlineIdentification tool.

Preparation and Disassembly

Start by turning off the water supply to your shower at the valves located behind the shower wall or under the sink. Open the faucet to relieve pressure in the lines.

How to repair/replace a leaky moen cartridge on a single lever tub/shower faucet and adjust temp.
How to repair/replace a leaky moen cartridge on a single lever tub/shower faucet and adjust temp.
Replace Stuck Moen Shower Faucet Cartridge
Replace Stuck Moen Shower Faucet Cartridge

Remove the shower's escutcheon (the cap covering the cartridge) using an adjustable wrench. Unscrew the gain trim (the part of the handle attached to the cartridge) using a flathead screwdriver. Set these parts aside for later use.

Removing the Old Cartridge

Remove the retaining clip located behind the cartridge removal tool using needle-nose pliers. Insert the cartridge removal tool into the faucet and turn counterclockwise to loosen and remove the old cartridge.

AD

If your cartridge is stuck, wrap some tape around the cartridge removal tool for better grip and try again. Once the cartridge is out, inspect the valve seat (>; consulting , you might need to replace it if there's significant damage.

Installing the New Cartridge

After ensuring the valve seat is in good condition, lubricate the new cartridge with plumber's grease. This will help create a proper seal and facilitate smooth water flow.

Insert the new cartridge into the faucet, ensuring it's correctly oriented according to the arrows on the cartridge and the faucet. Tighten it using the cartridge removal tool, turning clockwise until it's snug. You don't want to overtighten, though, as this can damage the cartridge.

AD

Reassembling the Shower Handle

Reinsert the retaining clip into the faucet. Reattach the gain trim using the flathead screwdriver. Make sure it's properly aligned before screwing it back on.

Place the escutcheon back onto the faucet and secure it using the adjustable wrench. Turn the water supply back on, and check for leaks. If everything is tight, your shower should now be working like new.

Final Testing

Turn on your shower and test the water pressure. If you've replaced the cartridge correctly, the water pressure should be restored to normal. If not, double-check your work and ensure you've replaced the cartridge with the right one.

AD

Regularly maintaining your shower's cartridge can prevent early breakdowns and keep your water pressure strong and steady. If you're ever unsure about any step in the process, don't hesitate to consult a professional plumber.

Now that you know how to replace a Moen shower cartridge, you're well-equipped to tackle this common issue. Happy DIY-ing!

AD