Step-by-Step: Change Moen Shower Faucet Cartridge
If your Moen shower faucet isn't working as it should, the culprit might be a faulty cartridge. Fortunately, replacing it is a common DIY task. So, let's guide you through the process of changing a Moen shower faucet cartridge.
Before you start, ensure you have the right tools and a new cartridge. It's also a good idea to have a friend or family member on hand to help, as some parts can be awkward to hold.
Preparation and Safety Measures
First things first, safety. Turn off the water supply to your shower. You can usually find the valve near your shower, under the shower, or in the basement. Once the water is off, turn on the shower to relieve any remaining pressure.
Next, gather your tools. You'll need an adjustable wrench, a Phillips screwdriver, and a flathead screwdriver. You'll also need a new Moen cartridge, which should match the model number of your current one.
Accessing the Cartridge
Start by removing the handle screw using a Phillips screwdriver. This will give you access to the cartridge. The screw might be hidden under a cap, which you can remove with a flathead screwdriver. Once the screw is out, remove the handle and set it aside.
Next, you'll see a hex cap with a rubber grommet. Remove this using an adjustable wrench. It might be tight, so be careful not to damage the plumbing. Once the cap is off, you should see the cartridge.
Removing the Cartridge
The cartridge should be held in place by a lock ring. Use adjustable pliers to carefully unscrew this ring. It might take some force, so be gentle. Once the ring is off, you can pull out the cartridge.
Now, you'll want to clean the area around the cartridge. Use a wire brush to remove any mineral deposits or rust. This will ensure a good fit for your new cartridge.
Installing the New Cartridge
Before you reinstall the cartridge, make sure to lubricate the O-rings with some plumber's grease. This will create a better seal and make the cartridge easier to install.
Now, insert the new cartridge into the valve body. It should fit snugly. Push it in as far as it will go, then slide the lock ring over the cartridge and hand-tighten it. You might need to use pliers to get it on, but don't overtighten.
Reassembling the Shower Handle
Put the hex cap back on and seat the grommet. It might help to use a wrench to tighten it. Then, reinstall the shower handle and hand-tighten the screw until it's snug.
Finally, turn the water supply back on and test your shower. The water flow should control easily with the handle, and the shower should work perfectly.
And there you have it! You've successfully changed your Moen shower faucet cartridge. If you're ever unsure about any part of the process, don't hesitate to consult a professional. Happy fixing!