how to remove a kwikset door knob

Learn How to Remove Kwikset Door Knob Easily

By Rachel Williams
AD

If you're wondering how to remove a Kwikset door knob, you've come to the right place. This simple DIY guide will walk you through the process step by step, ensuring a smooth and hassle-free experience.

Before you begin, it's important to note that while most Kwikset door knobs can be removed in a similar manner, some may have variations. Always check your specific model's instructions for any additional steps or precautions.

Preparation

Before you start, gather your tools. You'll need a screwdriver (usually a Phillips head for Kwikset), an adjustable wrench, and possibly a chisel and hammer for a few specific models. Clear the area around the door knob to provide ample workspace.

AD
(118) How to Remove the Cylinder from a Kwikset Door knob
(118) How to Remove the Cylinder from a Kwikset Door knob
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)

Next, make sure the door is secure. Close the door and use a temporary handle or latch to keep it shut while you work. This ensures the latch plate doesn't move around while you're removing the door knob.

Turning the Inside Locking Mechanism

Start by unlocking the door and opening it. Most Kwikset knobs have a turn button on the inside. Locate this button and turn it counterclockwise. This disengages the latch and allows you to remove the knob without damaging the latch mechanism.

How to Remove a Doorknob With Hidden Screws | Angi
How to Remove a Doorknob With Hidden Screws | Angi
How to Remove and Replace a Weslock Doorknob
How to Remove and Replace a Weslock Doorknob

If your knob doesn't have a turn button, you'll need to use an adjustable wrench. Insert the wrench into the screw hole on the inside lock (you might need to use a screwdriver to remove the hole-plug first) and turn it counterclockwise until the latch mechanism disengages.

Removing the Screw and Rosette

Now, with the latch disengaged, you can remove the setscrew that holds the knob in place. Use your screwdriver to remove the screw. If the screw is stripped or won't budge, you might need to use a bigger or smaller screwdriver, or even a screwdriver with an extension to gain more leverage.

AD

After removing the screw, you should be able to pull off the rosette (the decorative ring around the knob). If it's stuck, try gently tapping it with a hammer or using a chisel to loosen it. Be careful not to damage the door or the rosette.

Removing the Door Knob

With the rosette removed, you can now take off the door knob itself. Pull the knob straight out of the latch hole. It should slide off easily. If it's stuck, make sure the latch mechanism is still disengaged and try again.

If the knob is still not coming off, it might be because the spindle (the long cylindrical piece that connects the inside and outside knobs) is retracted. To fix this, turn the inside turn button (or use the adjustable wrench) clockwise to extend the spindle, then pull the knob off again.

AD

Removing the Other Knob

Finally, it's time to remove the other knob from the outside of the door. If you're replacing the knob with a similar model, you can skip this step. However, if you're upgrading to a new design or style, you'll need to remove the old exterior knob.

Most exterior knobs can be removed by unscrewing and lifting off the rose (the outside ring), then pulling the knob off. If you're having trouble, refer to your specific model's instructions or consult a professional to avoid damaging the door.

And there you have it! You've successfully removed your Kwikset door knob. If you're installing a new one, make sure to follow the manufacturer's instructions for a perfect fit. Happy upgrading!

AD
AD