How to Remove a Broken Tub Drain
A leaky or clogged bathtub drain can disrupt your daily routine and even cause mold growth. When the damage is extensive, removing and replacing the broken tub drain might be the only solution. Here's a step-by-step guide on how to remove a broken tub drain, ensuring a safe and effective repair.
Before you begin, gather your tools and materials. You'll need a screwdriver or a nut driver, a hacksaw, a claw hammer, a utility knife, and a new drain assembly. Safety first – wear heavy-duty gloves, eye protection, and a long-sleeved shirt to protect yourself from sharp edges and rusty parts.
Preparation and Drain Removal
Start by removing the existing drain cover. Use a screwdriver or nut driver to unscrew the crosspiece, which secures the drain cover to the tub. Lift the cover carefully to avoid shards of broken porcelain.
Next, remove the existing drain body. Insert the claw end of a claw hammer behind the body and push it down to loosen the concrete that holds it in place. Be cautious not to damage the surrounding porcelain. Continue to tap and twist until the drain body is completely loose and can be pulled out.
Cutting the Drain Tailpiece
Lift the tub to expose the drain tailpiece. This is the curved metal pipe that connects the drain body to the trap. Cut the tailpiece using a hacksaw. Make sure to cut above the point where the drain is attached to the tub, allowing room for the new assembly.
Once the tailpiece is cut, use a utility knife to score the area where the drain was attached to the tub. This will weaken the residue and make it easier to remove the old drain.
Removing Residue and Clearing the Opening
Use a chisel to carefully remove any remaining residue from the tub opening. Be gentle to avoid damaging the tub's surface. Once the opening is clear, insert a snaked drain tool or a Zip-It tool to ensure the opening is completely clean and free of debris.
Fill the tub with water to check for leaks. If there are no leaks, you're ready to install the new drain assembly. If there are leaks, trace them and make necessary repairs before proceeding.
Installing the New Drain Assembly
Begin by placing the new drain body into the opening from underneath the tub. From above, insert the new drain assembly's crosspiece into the drain body. Secure the crosspiece using a screwdriver or nut driver, ensuring it's tight but not overtightened.
Reconnect the drain tailpiece to the new assembly. Use a plumber's putty or teflon tape to create a watertight seal between the tailpiece and the new assembly. Wipe away any excess putty or tape with a wet cloth.
Securing the Drain Assembly
Use a claw hammer to gently tap the new drain body into place. Ensure the drain is centered and the crosspiece is level with the tub's surface. Once the drain is secure, wipe away any excess putty or residue.
Turn on the tub's faucet and check for leaks around the new drain. If there are no leaks, your new tub drain is properly installed.
Regular maintenance, such as cleaning the drain and removing hair buildup, can help prevent future issues and extend the life of your new tub drain. If you notice any issues or leaks, don't hesitate to contact a professional plumber for assistance. Stay proactive and Creating Spaces will continue to provide you with helpful tips and guides for maintaining your home's plumbing system.