How to Remove Watco Tub Drain
Clogged drains can be a constant source of stress and inconvenience. One of the most notorious culprits for this issue is the WATCO tub drain. This model of bathtub drain, popular for its innovative design, can sometimes pose challenges when it comes to cleaning out clogs. But don't worry, we're here to guide you through a step-by-step process on how to remove the WATCO tub drain and fix the clog.
Before we dive into the process, remember that safety is paramount. Always keep rubber gloves and safety goggles at hand to protect yourself. Now, let's get started!
Preparation and Understanding Your WATCO Tub Drain
To begin, it's crucial to understand the anatomy of your WATCO tub drain. This brand uses a metal plug with a rubber gasket, often referred to as an overflow plate. The drain chain connects this plate to the bathtub faucet, allowing you to lift and lower the drain with the water flowing or not. Familiarize yourself with these parts as they'll be key during the removal process.
After understanding your drain's mechanism, gather your tools. You'll need a pair of pliers, a screwdriver (usually Philips), and, if required, a drain snake. Additionally, have some towels nearby to catch any water that might spill out.
Step 1: Drain and Disassemble the Faucet
Start by removing any standing water in the bathtub. If the water doesn't drain, you may need to use a cup or pitcher to bail it out. Once done, turn the faucet on and let the water run for a minute to clear out the drain.
Next, use your pliers to carefully grip the tip of the drain chain near the faucet. Pull it upward to lift the drain plug. Keep pulling until it stops, then gently try to twist and unscrew it. The whole mechanism should lift out of the drain hole.
Step 2: Remove the Drain Plug and Overflows Plate
With the plug removed, look inside the drain for an overflow nut. Use your screwdriver to turn it counterclockwise and remove the overflow plate. Once you've detached the plate, you should see the main clog source. If it's a hard clog, it might require a drain snake to remove.
If you're using a drain snake, insert it into the drain and push it down, keeping the curve of the snake following the pipe. Once you feel resistance, turn the handle of the snake clockwise to break the clog. Keep doing this until you can pull the snake out freely.
Cleaning and Reinstalling the WATCO Tub Drain
Now that the clog is cleared, take this opportunity to clean all the parts of your drain. Use a mixture of water and dish soap or a specific drain cleaner to scrub and soak the parts before rinsing them off.
Before reinstalling, ensure all parts are dry to prevent any future issues. Start by reinserting the overflow plate and securing it with the nut. Then, drop the drain plug back into the drain hole and lower the drain chain back to its original position. Give the bathtub a test by filling it slightly and watching how the water drains.
Preventive Measures and Future Care
Preventing future clogs is just as essential as removing existing ones. Regular maintenance, like cleaning your drain once a month, can significantly reduce the likelihood of future clogs. Also, avoid pouring grease and large food particles down the drain, as they can easily create blockages.
Finally, consider using drain covers and screens to catch hair, soap residue, and other small particles. These preventive measures can save you time and effort in the long run.
You've now successfully removed and cleaned your WATCO tub drain. Remember, consistency is key in maintaining a clean and efficient drain system. Happy plumbing!