how to put chain on husqvarna chainsaw

stepping Up: How to Secure a Chain on Your Husqvarna

By Nicole Lewis
AD

Imagine you're out in your wooded backyard, ready to tackle that overgrown brush. You've got your Husqvarna chainsaw in hand, but when you pull the starter rope, nothing happens. Checked your gas and oil? Yep. Spark plug? Sparking nicely. So, what's the issue? Chances are, you've got a broken or improperly tensioned chain, and that's why you're here. Today, we're going to show you how to put a chainsaw chain on step by step with special emphasis on Husqvarna models. Let's dive right in.

Before we start, ensure you have the correct chainsaw chain for your Husqvarna model. Each model has specific chain types based on its engine, so it's crucial to match them to avoid potential damages and safety hazards. Picking the right chain will ensure your saw runs smoothly and safely.

Preparation: Gather Your Tools

Before you begin, gather the necessary tools. You'll need a scrench (a tool that combines a screwdriver and a wrench), a chain brakener (or a breaker bar with a socket), and, of course, your new chainsaw chain and chain oil. If you're unsure about any of these, consult your Husqvarna chainsaw manual or visit their official website.

AD
Filing the chain - Husqvarna Chainsaw Academy
Filing the chain - Husqvarna Chainsaw Academy
How to Tell If a Chainsaw Chain Is Installed Wrong
How to Tell If a Chainsaw Chain Is Installed Wrong
Fix a Husqvarna chainsaw that won't start
Fix a Husqvarna chainsaw that won't start

Once you have your tools, find a safe, sturdy work surface. Chain work can be fiddly, and you don't want your saw slipping or rolling away. Now, let's move on to the real work.

Safety First: Disassembly

First, remember to disconnect the spark plug wire to prevent the engine from starting accidentally. Next, loosen the chain and bar's side-mounted tension adjusting screw using your scrench. With the anti-rotation screw loosened, you can now rotate the chain to relieve tension. Be careful; the chain may move suddenly as tension is released.

Filing the chain
Filing the chain
How To Put A Chain On A Chainsaw: A Complete Guide
How To Put A Chain On A Chainsaw: A Complete Guide

Using your chain breaker or breaker bar, loosen and remove the bar nuts that secure the bar and chain to the saw. Once removed, you can take out the bar and chain from the unit. Set them aside; we'll be putting them back with a new chain.

Installing the New Chain

Start by wrapping the new chain around the bar in the correct direction. Most chains have stamped marks indicating the correct routing. The top (nose) of the chain should be aligned with the top (front) of the bar, and the drive links should be facing outwards. Ensure there are no twists in the chain, and the bar and chain are properly aligned.

AD

Once the chain and bar are properly seated, slide this assembly back onto the sprocket nose on your chainsaw. Then, reinsert the bar and chain into the saw, allowing the drive links to engage with the sprocket. Reinstall the bar nuts, and tighten them with your scrench. Remember, these should be tightened to the manufacturer's specifications - typically between 25-45 ft-lbs for Husqvarna saws.

Tensioning the Chain Correctly

Proper chain tension is crucial for your saw's performance and safety. Loose chains can cause kickback and damage cutting teeth, while overtensioned chains can reduce the saw's lifespan. To set your chain tension, turn the tension adjusting screw counterclockwise until the chain has about a 1/8" to 1/4" gap at the bottom of the bar (measuring from the guide bar's edge to the top of the chain's bottom plate).

Once you've reached the correct tension, snug up the anti-rotation screw to hold the tensioner tight. Then, quickly pull the starter rope to set the chain's final tension. Recheck the tension, and fine-tune as necessary. Always follow your Husqvarna manual's recommendations for exact tensioning guidelines.

AD

Reassembly and Test Run

Before you put your Husqvarna chainsaw back to work, take a moment to double-check everything. Ensure your chain and bar are properly seated and tensioned, and all bolts are securely tightened. Reconnect the spark plug wire, and you're ready to go.

Perform a brief test run to make sure your new chain and bar are tracking properly. You don't need to engage in full-blown cutting right away; a few gentle tugs on the starter rope should do the trick. Listen for any unusual noises - if everything's running smoothly, you're good to go.

And there you have it - putting a chain on a Husqvarna chainsaw has never been easier. With a little patience and the right tools, you've saved yourself a trip to the repair shop and maintained your saw's peak cutting performance. Now, get out there and conquer that brush pile!

AD
AD