how to put blades back on wahl clippers

How to Reattach Blades on Wahl Clippers

By Thomas Brown
AD

Have you recently replaced the blades on your Wahl clipper, only to find that they've come loose or fallen off? It's a common issue that can be easily resolved. In this guide, we'll walk you through a simple, step-by-step process on how to put blades back on Wahl clippers securely. Let's get started.

Before we dive in, always remember to unplug your Wahl clipper from the power source to ensure safety during the process.

Understanding Your Wahl Clipper Blades

The first step is understanding the different parts of your Wahl clipper. Most Wahl clippers come with adjustable blades, which consist of a top blade and a bottom blade. The top blade, also known as the adjustable blade, has teeth that move back and forth, while the bottom blade, or the fixed blade, stays stationary.

AD
Wahl clipper - How to take put blades and pieces back together
Wahl clipper - How to take put blades and pieces back together
How to Clean and Sharpen your Wahl Hair Clippers
How to Clean and Sharpen your Wahl Hair Clippers
How to Fix Wahl Clippers | Trimmers - Quick Troubleshooting Guide
How to Fix Wahl Clippers | Trimmers - Quick Troubleshooting Guide

The key to putting blades back on Wahl clippers is knowing how these parts interact with each other and with the blade holder.

Inspecting the Blades

Before reattaching the blades, it's crucial to inspect them for any signs of damage. Look for bent teeth, as they can cause uneven haircuts and should be replaced. Also, ensure the blades are clean and free from hair debris, as this can affect their performance.

How To Clean Clipper Blades
How To Clean Clipper Blades
How To Adjust Wahl Clipper Blades - Cuteness
How To Adjust Wahl Clipper Blades - Cuteness

If your blades are not reusable or have accumulated too much wear and tear, it might be a good idea to replace them with new ones rather than attempting to reattach them.

Identifying the Blade Holder

The blade holder, also called the comb guard, is the part that holds the blades in place. In most Wahl clippers, you'll find the blade adjustment lever on the side. This lever controls the distance between the top and bottom blades, determining the clipper's cutting length.

AD

Understanding the blade holder is essential as it's where you'll reattach the blades. It's a straightforward process, but one that requires precision to ensure the blades are held securely in place.

Reattaching Blades to Your Wahl Clipper

Now that we've got the basics covered, let's dive into the nitty-gritty of how to put blades back on Wahl clippers.

This process involves three simple steps: releasing the blades, realigning them, and then securely reattaching them.

AD

Releasing the Blades

To release the blades, first, ensure your Wahl clipper is switched off and unplugged. Then, locate the blade retainer lever. It's usually a small, knurled knob on the bottom of the clipper. Twist this lever counterclockwise to release the blades.

Be careful not to lose the blade retainer lever, as it's an essential part of your Wahl clipper's mechanism and can be replaced if lost.

Realigning the Blades

Once the blades are released, you'll need to realign them. Start by carefully separating the top blade from the bottom blade. Take note of their original positions; they should fit together like a puzzle piece.

AD

Insert the bottom blade into the clipper's track first, ensuring it's securely placed and facing the right direction. Then, slide the top blade into place, making sure it's aligned with the bottom blade. The teeth of both blades should intermesh perfectly.

Securing the Blades

Now that the blades are realigned, it's time to secure them back onto the clipper. Press the blades together firmly and then reinsert them into the clipper. You may need to wiggle them slightly to ensure they're properly aligned.

Once the blades are securely in place, twist the blade retainer lever clockwise to lock them back into position. You should hear a distinct "click" as the lever engages. Ensure the blades are held securely and move the lever a bit to ensure it's not too loose.

Testing the Reattached Blades

Before you start your haircut, it's a good idea to test the reattached blades. Power on the clipper and use it on a small, inconspicuous area of hair to ensure the blades are cutting smoothly and evenly.

If you're satisfied with the test results, you're now ready to use your Wahl clipper with confidence, knowing that your blades are securely attached and will provide the precision and reliability you've come to expect from Wahl products.

Remember, regular maintenance of your Wahl clipper, including cleaning and lubricating the blades, will help extend their lifespan and ensure optimal performance. Happy grooming!

AD