Reassembling Wahl Designer Clippers: A Simple Step-by-Step Guide
Discovering your Wahl Designer Clippers won't work due to a partial disassembly can be frustrating. Fortunately, putting them back together is a straightforward process. This guide will walk you through the steps to reassemble your Wahl clippers and start grooming again in no time.
Before we begin, ensure you have a clean workspace and your clippers' parts within reach. This guide assumes you've already removed the blades for cleaning or adjusting.
Gathering and Identifying Your Clippers' Parts
There are several parts in a Wahl Designer Clipper, but the most common to remove are the blades and the blade cover. You'll need to gather these parts along with any screws that may have come off.
Identifier your clippers' parts: the blade is the toothed metal component that cuts hair, and the blade cover is the plastic casing that protects the blade and holds it in place.
The Blade
The blade is the heart of your Wahl Designer Clipper. It's typically made of chromium-plated steel and has evenly spaced teeth. Make sure to clean your blade regularly to maintain its cutting quality.
If you've adjusted the blade's position for different hair lengths, ensure you remember its initial setting before reassembling.
The Blade Cover
The blade cover protects the blade and ensures a snug fit within the clipper. It also houses the blade adjustment lever, allowing you to change hair cutting lengths.
Check that all the screw holes on the blade cover align with those on the clipper body. If any screws are missing, replace them and secure the blade cover tightly before use.
Reassembling Your Wahl Designer Clippers
Now that you've identified and gathered all the parts, it's time to put them back together. Start with the blade, ensuring it's thoroughly cleaned and, if adjusted, returned to its original position.
Remember, safety is crucial when handling clippers. Always ensure the clippers are unplugged when reassembling or disassembling parts.
Securing the Blade
Place the blade into the clipper body. It should fit snugly and securely. Ensure the toothed side of the blade faces outward, towards the clipper's guards.
Familiarize yourself with the blade adjustment lever on the side of the clipper. Depending on the model, it may be numbered or have landmarks indicating different hair lengths.
Attaching the Blade Cover
Position the blade cover over the blade, ensuring the adjustment lever on the cover aligns with the one on the clipper body.
Secure the blade cover using the screws you removed earlier. Tighten them firmly, but avoid overtightening to prevent damaging the clipper or the blade.
After securing the blade cover, gently pull the lever to ensure the blade moves smoothly from side to side for proper adjustment.
Finally, plug in your Wahl Designer Clippers and switch them on. You should hear the familiar hum, and the blade should move smoothly. If everything works correctly, you're ready to start grooming again!
Regularly maintaining your clippers, including cleaning and lubricating the blades, will extend their lifespan and ensure they continue to deliver professional results. Happy grooming!"