how to put wahl designer clippers back together

Reassembling Your Wahl - Step-by-Step: How to Put Wahl Designer Clippers Back Together

By Daniel Thompson
AD

Experiencing a bit of a hair crisis? Don't let a disassembled Wahl Designer clipper hold you back. We've compiled this comprehensive, SEO-friendly guide to help you put your Wahl Designer clippers back together in no time. Let's dive in! Remember, safety first: ensure your clippers are clean, dry, and unplugged before beginning.

Whether you've recently unboxed your Wahl Designer clippers or they've come apart during use, this guide will walk you through the reassembly process step by step. With our handy tips and professional insights, you'll have your trusty clippers buzzing like new in no time. So, let's roll up our sleeves and get Started!

Familiarizing Yourself with Wahl Designer Clippers

Before we dive into the reassembly process, let's quickly familiarize ourselves with the Wahl Designer clipper's components. This will help you understand where each part goes and how they fit together.

AD
Wahl clipper - How to take put blades and pieces back together
Wahl clipper - How to take put blades and pieces back together
How I align & tune Wahl clippers
How I align & tune Wahl clippers
How to Clean and Sharpen your Wahl Hair Clippers
How to Clean and Sharpen your Wahl Hair Clippers

The Wahl Designer clipper typically comes with the following components: the body, the blade, the comb, the guards, the screw, and the power cord. Knowing these parts will help you identify them and ensure you have all the necessary pieces for reassembly.

The Body and Blade

The body, often referred to as the crankshell, houses the clipper's motor and is usually made from durable plastic. The blade, typically made from stainless steel, is responsible for the actual cutting action. It's crucial to know the difference between the two as they are distinct components with different functions.

How To repair Your Electronic Hair Clippers Spring Attachment
How To repair Your Electronic Hair Clippers Spring Attachment
How to Fix Wahl Clippers | Trimmers - Quick Troubleshooting Guide
How to Fix Wahl Clippers | Trimmers - Quick Troubleshooting Guide

When reassembling, ensure the blade is securely attached to the body. A loose blade can result in uneven cuts or, worse, cause the blade to detach during use, which could be dangerous. Tighten the blade screw gently but firmly to secure the blade in place.

The Comb and Guards

The comb is an attachment that protects the blade and helps guide hair through the clipper. Guards, on the other hand, determine the clipper's cutting length. Each Wahl Designer clipper comes with a set of guards (usually ranging from 1/16" to 1") that snap onto the blade to adjust the cutting length.

AD

To attach the comb or guards, align them with the blade's teeth, then snap them into place until you hear a clicking sound, indicating that they're securely attached. To remove, pull upwards on the tab located at the front of the attachment to release it from the blade.

Reassembling Your Wahl Designer Clippers Step-by-Step

Now that you're familiar with the components let's get down to business. Here's a step-by-step guide to reassembling your Wahl Designer clippers:

Always remember to work in a well-lit, clean area, and ensure your hands are clean to prevent any debris or dirt from entering your clipper.

AD

Step 1: Attach the Blade

Begin by connecting the blade to the body. Align the blade with the body, ensuring the blade's teeth face the same direction as the body's teeth. Once aligned, gently screw the blade onto the body. Turn the screw clockwise until it's secure but be careful not to overtighten, as this could strip the threads or even damage the clipper.

To test if the blade is secure, try gently pulling on the blade. If it doesn't wiggle or move, it's safe to proceed. If not, recheck your screw placement and tightness.

Step 2: Add the Comb or Guards

Next, attach the comb or guard(s) to the clipper. Choose the desired length, align it with the blade, and snap it into place. Ensure it's securely attached by gently pulling on it – if it's tight and snaps back into place, you're good to go! Repeat this step for any additional guards if you plan to use them.

AD

Pro Tip: If you're unsure which comb or guard to use, start with the larger sizes (longer lengths) and adjust as needed. You can always trim shorter, but growing hair back out takes time!

Step 3: Connect the Power Cord

The power cord, if not already attached, should be connected to the clipper's body. Ensure the prongs of the plug fit securely into the clipper's power jack. Once plugged in, give the clipper a quick test run by turning it on and checking if it's functioning correctly.

Safety Note: Always test your clipper with an extension cord or power strip before plugging it directly into a power outlet. If there are any issues, it's easier and safer to troubleshoot with an extension cord.

Tips for Maintaining and Cleaning Your Wahl Designer Clippers

Congratulations! Your Wahl Designer clippers are now fully reassembled and ready for action. To ensure their longevity and performance, here are some tips for maintaining and cleaning your clippers:

Maintaining cleanliness is crucial for both the clippers' and your skin's health. Regularly clean your clippers after each use to remove any hair trimmings, debris, or residue. You can do this by gently brushing the blade with a soft-bristled brush, ensuring no hair or dirt remains.

Oiling Your Wahl Designer Clippers

Regular oiling is essential for keeping your clipper's blade lubricated and functioning optimally. Wahl recommends using their official blade oil for best results. Apply a few drops of oil onto the blade, then gently rub it into the blade's teeth using a soft brush. Wipe away any excess oil with a clean, dry cloth.

A rule of thumb is to oil your clippers before each use. However, if you notice that the blade isn't moving as smoothly as it should, it might be a sign that it's time for an oil touch-up.

Rinsing and Descaling

For an extra-deep clean, you can rinse and descale your Wahl Designer clippers. Descaling helps remove any mineral buildup that could negatively affect performance. First, clean the blade as usual, then remove any accessories or guards. Run the clipper under lukewarm water, ensuring the water doesn't reach the power jack. After rinsing, dry the clipper Thoroughly with a clean towel, and apply a few drops of oil to the blade.

Pro Tip: Always allow your clippers to air dry completely before storing them to prevent moisture buildup, which could lead to rust or damage.

Troubleshooting Common Wahl Designer Clipper Issues

Occasionally, you may encounter issues with your Wahl Designer clipper. Here are some common problems and their solutions:

If your clipper doesn't turn on, first check the power cord and power jack for any signs of damage or disconnection. If everything looks good, try plugging the clipper into a different outlet to rule out any electrical issues. If the clipper still doesn't turn on, it might be time to consult Wahl's customer support or take your clipper to a professional for servicing.

Screeching Sounds

A screeching sound could indicate that the blade needs oiling or that the clipper's interior needs cleaning. If oiling doesn't solve the problem, disassemble the clipper and clean the interior, paying close attention to the blade and other moving parts. After cleaning, reapply oil and reassemble. If the screeching persists, consult Wahl's support for further assistance.

Warning: Never attempt to disassemble or clean your clipper while it's plugged in. Always ensure your clipper is unplugged and dry before performing any maintenance tasks.

Uneven Cuts

Uneven cuts might be due to a loose blade or faulty guard. First, check that the blade is securely attached to the body. If it's tight, try replacing the guard with a new one. If the issue persists, you might need to purchase a new blade or have your clipper serviced by a professional.

Remember, regular maintenance and proper care will extend the lifespan of your Wahl Designer clippers. Happy clipping!

AD