how to install schluter drain

Step-by-Step: How to Install Schluter Kerdybond Drain

By Andrew Clark
AD

Ensuring proper drainage is a crucial aspect of any tiling project, and Schlüter is a renowned brand that offers reliable solutions. If you're planning to install a Schlüter drain, you're in the right place. This guide will walk you through the process step by step, ensuring you achieve a durable, efficient, and seamless result.

Before we dive into the installation process, it's important to understand that Schlüter drains are designed to accommodate various tile thicknesses and interface perfectly with Schlüter's other shower systems. Always ensure you have the right drain model for your specific project, whether it's a linear, point, or square drain.

Gathering and Preparing Your Tools and Materials

The first step in any project is ensuring you have the right tools and materials. Here's what you'll need for Schlüter drain installation:

AD
How to install the Schluter®-KERDI-DRAIN with a Mortar Base and Waterproofing
How to install the Schluter®-KERDI-DRAIN with a Mortar Base and Waterproofing
How to Install Schluter Drain Grate
How to Install Schluter Drain Grate
Mastering Shower Drain Installation: Schluter's Foolproof System
Mastering Shower Drain Installation: Schluter's Foolproof System
  • Schlüter drain
  • Tile adhesive
  • Grout
  • Silicone sealant
  • Trowel
  • Utility knife or tile cutter
  • Measuring tape
  • Plunger
  • Level

Choosing the Right Drain

Selecting the right Schlüter drain is crucial. Linear drains are popular for their seamless look and easy installation. Point and square drains are ideal for traditional shower settings. Always consider your tile size, substrate, and membrane when making your choice.

Planning Your Drain Location

Plan your drain location based on your shower layout and tile size. Schlüter KERDI-LINE and other linear drains can be installed along the shower wall or in the middle, depending on your design. For point and square drains, center them in the shower pan.

KERDI-DRAIN-H Installation Instructions | Schluter
KERDI-DRAIN-H Installation Instructions | Schluter
Schluter®-KERDI-DRAIN Installation with No Access to Plumbing
Schluter®-KERDI-DRAIN Installation with No Access to Plumbing

Preparing the Substrate and Membrane

Prior to installing the Schlüter drain, ensure your substrate (concrete or cement board) is solid, level, and clean. Any irregularities or moisture can compromise the installation and lead to leaks.

Next, apply the Schlüter KERDI-N Jeho shower waterproofing membrane. This ensures a waterproof barrier around the drain, preventing leaks and directing water towards the drain.

AD

Marking and Cutting the Drain Opening

Using a measuring tape, mark the drain location on the membrane. For linear drains, create a straight line, and for point or square drains, mark the center. Use a utility knife or tile cutter to score and cut out the membrane and substrate.

Adjacent Wall Preparation

If you're installing a linear drain along the wall, you'll need to prepare the adjacent wall. Ensure it's level and construct a slight slope using a cement-based underlayment or Schlüter's KERDI-BOARD on existing walls to direct water towards the drain.

Installing the Schlüter Drain

Now that your substrate and membrane are prepared, it's time to install the drain. Begin by inserting the Schlüter drain into the opening. For linear drains, ensure it's level and follows your marked line.

AD

Secure the drain by applying a generous amount of approved Schlüter tile adhesive around the drain's outer edge. Spread the adhesive evenly using a trowel, covering the membrane around the drain opening. Press the drain firmly into place.

Securing the Drain

Use Schlüter's KERDI-CLACK stainless-steel clamps to secure the drain. Apply the clamps along the length of the drain (for linear drains) or around its perimeter (for point or square drains). Tighten the clamps evenly to secure the drain and compress the membrane against the drain's collar.

Installing the Drain Cover

Once the drain is securely installed, you can install the drain cover. Apply a thin layer of approved Schlüter tile adhesive on the back of the cover and position it over the drain. Ensure it's level and allowed to dry as per the manufacturer's instructions.

AD

Testing and Finishing Up

Before you grout the drain, it's essential to test the installation. Fill the shower or use a large container to pour water over the drain. Verify that water drains correctly and quickly.

Once satisfied with the test, prepare the Schlüter drain for grouting. Apply a bead of silicone sealant along the drain's edge and remove any excess adhesive or debris. Then, apply your chosen grout, following the manufacturer's instructions. Ensure you deepen the grout lines slightly to create a more robust bond.

After allowing the grout to dry, clean the area thoroughly. Apply a final layer of silicone sealant along the drain's edge to ensure a waterproof seal. Then, caulk any gaps between the drain and the surrounding tiles for a seamless look.

Congratulations! You've successfully installed a Schlüter drain. Now you can continue with your tiling project, knowing your shower drain is durable, efficient, and offers a seamless appearance. Always remember to follow manufacturer instructions and local building codes for the best results. Happy tiling!

AD