how to install lavatory drain

Step-by-Step Guide to Installing a Lavatory Drain

By John Thomas
AD

Installing a lavatory drain might seem like a daunting task, but with the right tools and steps, it can be a rewarding DIY project. This guide will walk you through the process, from gathering materials to ensuring your new drain is fully functional and leak-free.

Before we begin, it's crucial to understand that this task requires some basic plumbing knowledge and tools. If you're not confident in your abilities, it's always best to call a professional. Let's dive into the step-by-step guide to installing a lavatory drain.

Gathering Tools and Materials

To ensure a smooth installation, you'll need to gather all the necessary tools and materials first.

AD
a close up of a metal object on a wooden surface with wires and plugs
a close up of a metal object on a wooden surface with wires and plugs
How To Seal A Bathroom Sink Drain? (Caulk vs Putty)
How To Seal A Bathroom Sink Drain? (Caulk vs Putty)
How to Install a Sink Drain
How to Install a Sink Drain

Tools:

  • Adjustable wrench
  • Hacksaw or PVC pipe cutter
  • Plumber's putty
  • Drain snake or coat hanger (for cleaning)
  • Teflon tape
  • either a P-trap or an S-trap assembly (depending on your bathroom setup)
  • Lavatory drain assembly (including the drain, tailpiece, and overflow)

P-trap vs S-trap: Understanding the Differences

The main difference between a P-trap and an S-trap is their shape. P-traps have a bend in the middle, while S-traps have a longer, 'S'-shaped bend. P-traps are generally more common and can be easier to install and maintain, while S-traps can be necessary in older homes or where space is limited.

Awesome DIY Plumbing
Awesome DIY Plumbing
How to Replace a Pop-Up Sink Drain - Install the New Drain - HandyManHowTo
How to Replace a Pop-Up Sink Drain - Install the New Drain - HandyManHowTo

Regardless of the type, both traps serve the same purpose: to hold a amount of water to prevent sewer gases from entering your bathroom.

Differences in Drain Materials

The lavatory drain assembly comes in various materials such as brass, chrome, or plastic. Choose one that complements your bathroom's decor and is durable enough to withstand daily use. For example, brass and chrome are popular choices for their durability and elegance.

AD

Some assemblies may come with a pop-up drain, allowing you to control water flow. Others might have a flat surface at the bottom of the drain. The choice depends on your preference and the desired water flow control.

Removing the Old Drain

Before installing the new drain, you'll need to remove the old one. Turn off the water supply at the shutoff valve behind the toilet or under the sink. Then, open the faucet to release any remaining water pressure.

Using an adjustable wrench, loosen and remove the old drain assembly. Wipe the area clean to ensure a proper seal for the new drain.

AD

Preparing the Lavatory Drain

Before installation, ensure the new drain is clean to create a proper watertight seal. Remove any protective plastic or paper covering the drain and tailpiece.

If your new drain assembly has a pop-up, ensure it's fully inserted into the drain body. Otherwise, it might not function correctly once installed.

Installing the Lavatory Drain

Apply a generous amount of plumber's putty to the underside of the lavatory drain's bottom lip. This will create a watertight seal, preventing leaks. Center the drain over the drain hole in the basin, and press firmly and evenly to spread the putty.

AD

Using an adjustable wrench, firmly attach the tailpiece to the drain body by tightening the fitting nut. Be careful not to overtighten, as this can damage the drain and cause leaks.

Installing the P-trap or S-trap

With the lavatory drain secured, it's time to install the P-trap or S-trap assembly. First, ensure the trap's inlet and outlet are oriented correctly. The inlet should connect to the lavatory drain, while the outlet should connect to the waste pipe (stack) in the wall.

Using a hacksaw or PVC pipe cutter, measure and cut the drainpipe to the appropriate length, ensuring it's neither too long nor too short. Apply Teflon tape to the threads of the trap's inlet and outlet to create a watertight seal.

Attaching the P-trap or S-trap to the Drain and Waste Pipe

Press the P-trap or S-trap inlet firmly against the lavatory drain tailpiece, then secure it using a compressed fitting clip or by tightening the fitting nut. Ensure a proper seal is formed by running your hand around the fitting to check for any leaks.

Connect the trap's outlet to the waste pipe in the wall using either an adjustable wrench (for most traps) or aío pipe solver (for plastic traps). Tighten securely but avoid overtightening, as this can cause the pipes to break.

Testing the Drain for Leaks

Fill the sink basin with water and let it drain. Check for any signs of leaks around the drain and trap connections. Wipe the area with a damp cloth to look for any water residue, indicating a watertight seal.

If there are no leaks, your installation is complete. If you find any leaks, tighten the connections further or apply more plumber's putty to the drain's bottom lip.

Congratulations on successfully installing your new lavatory drain! Regular maintenance, such as cleaning the drain regularly with a drain snake or coat hanger, will help keep your drain functioning perfectly. If you encounter any issues, don't hesitate to contact a professional plumber for assistance. Happy plumbing!

AD