how to install schluter tile edge

"Mastering Schluter: Step-by-Step Guide to Tile Edge Installation"

By Joseph Jackson
AD

Installing Schluter tile edges not only provides a clean, professional finish to your tiled surfaces, but it also ensures longevity and durability. This step-by-step guide will walk you through the process, ensuring a perfect outcome that'll leave your space looking stunning. Let's dive in.

Before you start, gather your materials: Schluter trim pieces, thin-set mortar, notched trowel, sanded grout, grout float, sponge, and safety gear including gloves and glasses.

Preparation: Planning and Measuring

Precision is key when it comes to Schluter tile edges. Start by planning and measuring carefully. Measure the length of your edges and cut the Schluter trim pieces accordingly using a hacksaw or nipper. Remember to account for any overlaps and ensure mitered corners fit snugly.

AD
️ HOW TO CUT & INSTALL SCHLUTER ALUMINUM BULLNOSE TILE EDGING TRIM➔Easily Transition Tile & Drywall
️ HOW TO CUT & INSTALL SCHLUTER ALUMINUM BULLNOSE TILE EDGING TRIM➔Easily Transition Tile & Drywall
a woman measuring the height of a wall with a ruler on it's side
a woman measuring the height of a wall with a ruler on it's side
Tile edge metal installation how to install after tile is set
Tile edge metal installation how to install after tile is set

Create a layout plan, marking measurements on the floor. This will serve as a reference throughout the installation and prevent mistakes.

Securing the Edge Trim

Start from a corner and apply a layer of thin-set mortar to the back of the Schluter trim piece using your notched trowel. Ensure the mortar covers the entire surface and enters the slots evenly.

a man in black gloves is fixing tile on a bathroom wall with blue handles and the words how to finish tile edges
a man in black gloves is fixing tile on a bathroom wall with blue handles and the words how to finish tile edges

Press the trim firmly into place, aligning it with your marks. Use spacers or a level to keep it flush with the tile surface. Allow the mortar to set for the recommended time, usually around 24 hours.

Applying Wall Edges

For wall edges, you'll need to attach the Schluter trim before tiling. First, ensure you have sufficient wall access. Apply mortar to the back of the trim piece, then press it firmly onto the wall, using your marks as a guide.

AD

Use Schlüter-KERDI-BOARD or Schlüter-KERDI-DUAL membrane for waterproofing and crucial support. Once the mortar has set, proceed with your tiling, bedding tiles right up to the trim using the same thin-set mortar.

Finishing: Grouting and Cleaning

Once your tiles are set and you've waited the recommended curing time, you can proceed with grouting. Choose a sanded grout for wider joint sizes to prevent shrinkage. Prepare the grout according to the manufacturer's instructions and apply it to the joints using a rubber float, working diagonally.

Gently wipe away excess grout with a damp sponge, rinsing it frequently to avoid spreading grout haze. Allow the grout to set for the recommended time, usually about 15-30 minutes, then use the sponge again to clean the surface.

AD

Final Inspection and Maintenance

Conduct a final walkthrough, checking for missed spots or areas that need touch-up. Use a grout sealer to protect your finished surface, following the manufacturer's instructions. Regularly clean your tiled areas, spot-cleaning any dirt or stains that appear.

With proper care, your Schluter-edged tiles will remain stunning and durable, adding a touch of elegance to your space for years to come. Happy tiling!

AD