how to install pex shower valve

"Easy Steps: How to Install PEX Shower Valve"

By Andrew Thompson
AD

Are you planning to upgrade your bathroom with a modern pex shower valve? Installing a pex shower valve not only enhances your shower experience but also upgrades your bathroom's aesthetics. This comprehensive guide will walk you through the process, from gathering tools to completing the installation, ensuring a smooth and efficient procedure.

Before you start, it's crucial to understand that a pex shower valve installation involves working with water pipes. Ensure you're familiar with local plumbing codes and, if needed, consult a professional plumber. Now, let's dive into the step-by-step process of installing a pex shower valve.

Preparation and Gathering Tools

Before you begin, gather the necessary tools and materials. Having everything at hand ensures a smooth and efficient process.

AD
How to - Install a Shower Valve using Pex Tubing Plumbing & Sharkbite connectors EASY - DELTA Faucet
How to - Install a Shower Valve using Pex Tubing Plumbing & Sharkbite connectors EASY - DELTA Faucet
Delta Diverter Valve Installation with PEX B
Delta Diverter Valve Installation with PEX B
DIY How to Install a Shower Valve using Pex Plumbing
DIY How to Install a Shower Valve using Pex Plumbing

You'll need:

  • Pex shower valve (ensure it's compatible with your existing setup)
  • Pex tubing
  • Pex tube cutter
  • Tubing expander (if using compression fittings)
  • PeSAE or push-fit fittings (or compression fittings and associated nuts)
  • Teflon tape or plumber's grease (for compression fittings)
  • Pipe wrench
  • Channel lock pliers
  • Adjustable wrench
  • Hacksaw or fine-tooth saw (for cutting metal pipes)

Isolate the Water Supply

Start by turning off the water supply to your bathroom. Locate the shut-off valves for both the hot and cold water lines, usually near the shower or under the sink. Turn the handles clockwise until they're fully closed.

Pex on Shower/Tub Rough In
Pex on Shower/Tub Rough In

To confirm the water is off, turn on the faucet or shower. If no water comes out, the supply is isolated. If water does come out, you might need to shut off the main water supply to the house.

Remove the Old Valve

With the water supply isolated, you can now remove the old shower valve. Using a pipe wrench, slowly turn the valves counterclockwise until they're loose. If they're stuck, applying heat with a blowtorch can help. Once loose, unscrew them by hand.

AD

Next, disconnect the water supply lines from the old valve. If they're stubborn, use channel lock pliers or adjustable wrenches to gently loosen them. Once disconnected, remove the old valve.

Installing the Pex Shower Valve

Now that the old valve is removed, it's time to install the new pex shower valve. Pex systems use either compression fittings or PeSAE (Push-to-connect, Seal, Assure, Engage) fittings. Follow the specific instructions for your fitting type.

Using the correct size and type of brass fittings ensures a secure connection. Always follow the manufacturer's guidelines for the specific pex shower valve you're installing.

AD

Connecting the Water Supply Lines

Starting with the cold water line, cut the pex tubing using a pex tube cutter. The tubing should extend beyond the fitting by about 1/2 inch. If using compression fittings, insert the tuber into the fitting and expand it using a tubing expander, following the manufacturer's instructions.

Apply Teflon tape or plumber's grease to the male threads of the fitting, then screw it onto the valve. Tighten it securely using a pipe wrench. Repeat this process for the hot water line.

Installing the Pex Shower Valve

With both water supply lines connected, it's time to install the pex shower valve. If using compression fittings, apply Teflon tape or plumber's grease to the shower arm's male threads and screw on the pex valve. Tighten it securely.

AD

If using PeSAE fittings, insert the pex tubing into the fitting until you hear a clicking sound, indicating the valve is secure. Ensure the pex tubing is inserted fully and evenly.

Testing the Installation

Once the pex shower valve is installed, it's time for a leak test. Slowly turn the water supply valves back on. Listen for any leaks around the fittings. If there are no leaks, your installation was successful.

Turn on the shower to ensure water flows through the new valve and doesn't leak from the connections. If everything works perfectly, you've successfully installed your pex shower valve!

Congratulations on completing your pex shower valve installation! Now, enjoy your upgraded shower experience. If you encountered any difficulties, don't hesitate to consult a professional plumber. Regular maintenance will ensure your pex shower valve continues to serve you well for years to come.

AD