how to install bearings skateboard

How To Install Bearings on a Skateboard: Easy, Step-By-Step Guide

By William Young
AD

If you're new to the world of skateboarding or just looking to upgrade your gear, one of the most crucial components you'll need to understand and maintain are your skateboard bearings. This little but vital part helps your skateboard wheels make smooth rotations, ensuring a stable and controlled ride. Here's a comprehensive guide on how to install skateboard bearings like a pro.

Before diving into the process, ensure you have all the necessary tools and components. You'll need: skateboard bearings, spacers, speed rings (if your bearings came with them), skate tool, and your skateboard deck, wheels, and trucks.

Preparation: Readying Your Components

For a seamless installation, let's first prepare your components. Start by removing your old wheels and trucks from your skateboard deck. This can be done using a skate tool to loosen the kingpin nut and bolt. Once removed, set them aside for further disassembly.

AD
Make Your Skateboard Bearings Last FOREVER!
Make Your Skateboard Bearings Last FOREVER!
How to make Bearing Faster for skateboard
How to make Bearing Faster for skateboard
How to Replace Skateboard Wheel Bearings With and Without a Bearing Press
How to Replace Skateboard Wheel Bearings With and Without a Bearing Press

Next, remove the old bearings, spacers, and speed rings from your wheels. This can be a bit tricky as bearings can be tightly packed in. Use the skate tool's end to press out the bearing from the inside of the wheel while keeping the wheel on a flat surface.

Installing the Bearings: Step-by-Step

Now that you have all the necessary parts, let's dive into installing your new bearings. Start by removing the protective shield from each bearing using your skate tool. This step isn't mandatory but helps ensure dirt and debris don't get trapped inside while riding.

How to clean skateboard bearings
How to clean skateboard bearings

Next, assemble your bearing, spacer, and speed ring (if applicable) into a single unit. Place the bearing onto a flat surface, followed by inserting the spacer into the center hole. If you're using speed rings, place those on the sides facing out. Ensure all parts are secure and snug against each other.

Positioning the Bearing Spacers

Spacers play a crucial role in maintaining the alignment and durability of your wheels and trucks. Their position affects your board's stability and responsiveness. Typically, the inner spacer should sit nearest the truck's base plate, with the outer spacer closest to the wheel's outer edge.

AD

However, some skaters prefer a 'flush' setup, eliminated spacers altogether for a more responsive and snappier feel. Regardless of your preference, ensure both bearings on a single truck have their spacers in identical positions for symmetrical performance.

Assembling the Trucks

Now that your bearings and spacers are ready, let's reassemble your trucks. Start by placing the assembled bearing and spacer onto the truck's axle. Have the outer part of the bearing touch the wheel baseplate, ensuring the correct spacer position. Next, slide the wheel onto the axle, followed by the second assembled bearing and spacer.

Before securing the axle nut, give the wheel a spin to ensure it rotates freely and smoothly. If not, remove the nut and reinstall, adjusting the bearing as necessary. Once satisfied with the wheel's spin, secure the axle nut with your skate tool, leaving it slightly loose for now.

AD

Repeat this process for all your trucks, ensuring each truck's spacers are in the same position for consistent performance. Once all wheels are on and spinning smoothly, give each axle nut a final, firm tighten to secure your setup.

Congratulations, you've successfully installed your new bearings! Regular cleaning and lubrication will keep your bearings spinning smoothly, enhancing your skateboarding experience.

Remember, the right bearing and setup can significantly impact your skateboarding performance, so don't hesitate to experiment with different configurations. With a bit of tinkering and patience, you'll soon be rolling like a pro. Happy shredding!

AD
AD