how to install skateboard bushings

Mastering Skateboard Bushings: A Step-by-Step Installation Guide

By Brian Allen
AD

Skateboard bushings play a pivotal role in determining the trucks' turning radius, stability, and overall ride feel. Regularly checking and replacing them ensures optimal performance and safety. But how do you install skateboard bushings? We've compiled a comprehensive guide to help you through the process.

Before you begin, gather your tools and materials: new bushings, trucks, a compression tool or your trucks' kingpin nut, skateboard tools, and appropriate lubricant like oil or wax.

Preparation and Understanding Your Bushings

Skateboard bushings come in sets, usually with-hard and soft variants. The hardness is measured in durometers (A), with higher numbers representing harder bushings. Understanding this helps in choosing the right bushings for your riding style.

AD
How To Replace Your Skateboard Bushings (with Griff)
How To Replace Your Skateboard Bushings (with Griff)
How to Replace Skateboard Wheel Bearings With and Without a Bearing Press
How to Replace Skateboard Wheel Bearings With and Without a Bearing Press
the diagram shows how to install an external gear wheel and pulley for this vehicle
the diagram shows how to install an external gear wheel and pulley for this vehicle

Bushings are symmetric. There's no 'top' or 'bottom' - they function the same regardless of their orientation. They're designed this way for easy installation and balanced performance.

Preparing Your Trucks

Before installing new bushings, inspect your kingpin and baseplate for signs of excessive wear or damage. Ensure your kingpin is lubricated to facilitate easy turning and compressing. If needed, replace the kingpin or baseplate.

Using my New Open Source Mold System to Cast DIY Skateboard Bushings
Using my New Open Source Mold System to Cast DIY Skateboard Bushings

Remove the old bushings by unscrewing the kingpin nut with your hand or a tool. Completely extract the kingpin from the truck and discard the old bushings.

Installing the Bushings

Apply lubricant to the cup washers and the bushing surfaces that will contact them. This reduces friction, preventing ice-like seizing and promoting smoother truck turns.

AD

Slide the bushing onto the kingpin. It should fit snugly. There should be no excessive wobbling or play. If there is, consider using a harder or softer bushing, depending on your desired feel.

Now, place one cup washer onto the kingpin, followed by the second bushing. Repeat the lubrication process for the other side of the truck.

Insert the kingpin into the hollow part of the bushing barrel. Ensure it goes all the way through and the head of the kingpin is facing outwards. This allows for easy compression and turning of the truck.

AD

Compressing the Bushings

Compressing the bushings is crucial for adjusting the trucks' responsiveness and stability. This step should be done after installing all bushings and cup washers on both trucks.

Use a compression tool or your trucks' kingpin nut to evenly compress both bushings. Apply even pressure, compressing equally from both sides. Too much compression leads to tight, unresponsive trucks, while too little results in loose, wandering trucks.

Fine-tuning for Your Preferred Ride

The amount of compression depends on your riding style. Start with a standard amount of compression, then adjust as needed. Most riders aim for bushings that are just barely touching each other when the trucks are at a neutral angle.

AD

Contrary to popular belief, there's no perfect bushing compression. Experiment with different amounts of compression to find the feel that suits you best. This is part of the joy of customizing your skateboard.

Once you've found your sweet spot, tighten the kingpin nut securely but not excessively. You want to keep the bushings compressed, but avoid over-tightening, which could cause the baseplate to warp or the kingpin to bend.

Finally, take your skateboard out for a spin. Feel the trucks' responsiveness and adjust the bushing compression as needed. Regularly check your bushings for wear, and replace them when necessary to maintain optimal performance and safety on your skateboard.

AD