how to put bushings on a skateboard

Mastering Skateboard Bushing Installation: A Step-by-Step Guide

By Thomas Garcia
AD

Installing bushings on a skateboard is a crucial step in maintaining your board's performance and ensuring a smooth ride. Over time, bushings wear out, causing a wobbly or sloppy truck, which can lead to instability and loss of control. This comprehensive guide will walk you through the process of replacing your skateboard bushings, from gathering necessary tools to putting them in place.

Before you start, it's essential to identify your bushings' shape and branding. Skateboard bushings come in various shapes - cone, barrel, or=new. Understanding this will help you choose the right replacement, as different shapes affect your board's turning ability and stability.

The Tools You'll Need

Gathering the right tools before starting will make the process smoother and more efficient.

AD
How to make Bearing Faster for skateboard
How to make Bearing Faster for skateboard
How to BS POWERSLIDE
How to BS POWERSLIDE
Make Your Skateboard Bearings Last FOREVER!
Make Your Skateboard Bearings Last FOREVER!

Here's what you'll need:

  • Socket wrench or crescent wrench
  • Bushing press (optional, but useful for precise installation)
  • New bushings
  • Bearing spacers and washers (if not included with your new bushings)

Choosing the Right Bushings

Bushing durometer, or hardness, is measured in "A" on the Shore scale. Softer bushings (around 70a-87a) provide more control and stability, while harder bushings (90a-99a) are ideal for faster, more responsive turning.

What are Skateboard Bushings? - 101 Beginner's Guide
What are Skateboard Bushings? - 101 Beginner's Guide

When choosing bushings, consider your skating style, board size, and truck type. Tighter, smaller boards and smaller trucks call for softer bushings, while looser, larger boards and larger trucks work best with harder bushings.

Preparing Your Trucks

Start by removing the kingpin nut, followed by the kingpin itself. Your truck should now slide off the board easily.

AD

Inspect the kingpin for any signs of wear, and ensure it's clean and lubricated. You might also want to consider upgrading your kingpin if it's bent or damaged.

Removing the Old Bushings

With the truck detached, it's time to remove the old bushings. For this, you'll need a socket wrench or crescent wrench, which you can use to press the bushing out from behind.

Loop the wrench under the top of the bushing and place the backside of the wrench on a hard surface or use a vice. Apply steady pressure until the bushing pops out. Repeat the process for the other bushing and the bottom bushing on the other truck.

AD

Cleaning the Truck Base and Post

Before installing new bushings, clean the truck base and kingpin hole to remove any dirt, dust, or old grease. This ensures a smooth fit and better performance for your new bushings.

Use a rag or brush with some alcohol or nail polish remover (acetone) to clean the surfaces. Allow them to dry completely before moving on to the next step.

Installing the New Bushings

The installation process is essentially the reverse of removing the old bushings. Start by placing your new bushing into the kingpin hole of the truck base.

AD

To press the bushing into place, you can use a bushing press for a precise fit or a socket wrench and a hard, stable surface. Apply steady pressure until the bushing is fully seated and level with the truck base. Repeat the process for the other bushing and the bottom bushing on the other truck.

Reassembling Your Trucks

Now that your new bushings are installed, it's time to reassemble your trucks.

Starting with the bottom bushing, slide your truck back onto the board and align it with the kingpin hole. Insert the kingpin through the truck, board, and the top bushing. Thread the kingpin nut on, and hand-tighten it.

Tightening the Kingpin Nut

Most skaters prefer a medium tight kingpin nut for better stability and control. However, experiment with different tightness levels to find what works best for you.

Use your socket wrench to tighten the nut to the desired level (typically between 8 to 12 Newton meters of torque). Be careful not to overtighten, as this can cause the kingpin to bend, damage the bushing, or even break the truck.

Finally, give your skating a test run to experience the improved performance and stability of your newly installed bushings. Regularly inspect and maintain your trucks to ensure they stay in top condition. Happy skating!

AD