how to install a toilet lever

Step-by-Step: How to Install a Toilet Lever

By David Johnson
AD

Installing a toilet lever, also known as a flush handle or trip lever, is a straightforward DIY task that can save you the cost of hiring a professional plumber. This guide will walk you through the process, from gathering tools to replacing the lever and ensuring a tight, leak-free connection.

Before we dive into the steps, it's essential to understand that this guide applies to most standard toilets with a lever flush system. However, if your toilet is an older model or has unique features, you may need to adjust the process accordingly. Always ensure you have the correct replacement lever for your toilet model to ensure a proper fit and functionality.

Preparation and Safety Measures

Before starting, gather all necessary tools and Parts:

AD
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube
What Is a Toilet Trip Lever
What Is a Toilet Trip Lever
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
  • A new toilet lever arm
  • Adjustable wrench
  • युक्तुःpunges
  • Teflon tape (plumber's tape)
  • Safety glasses

Safety should always be your top priority. Put on safety glasses to protect your eyes from any debris or water splashes. If your toilet is located in a small or enclosed area, consider opening a window or using a portable fan to ventilate the space.

Turning Off the Water Supply and Flushing

Locate the water supply valve behind or below the toilet. Turn it clockwise to shut off the water supply. This might require some force, so use care not to damage the valve. Once the water is off, flush the toilet to empty the tank and used any remaining water in the bowl.

How to Install Toilet Flush Handle | Korky Universal Trip Lever
How to Install Toilet Flush Handle | Korky Universal Trip Lever
Installing My New Toilet and Changing the Toilet Lever
Installing My New Toilet and Changing the Toilet Lever

Rather than relying on the tank water alone, consider using a towel or sponge to wipe out any remaining water in the bowl. This additional step will make your work area cleaner and safer throughout the procedure.

Removing the Old Lever

After turning off the water supply and flushing, locate the nuts securing the old lever to the toilet tank. There should be one nut on the inside of the tank and one on the outside. Use an adjustable wrench to turn the nuts counterclockwise and loosen them. You may need to apply some force, so be careful not to strip the nuts.

AD

Once both nuts are loose, carefully pull the old lever towards you to remove it from the tank. If the lever is stuck or difficult to remove, try wiggling it gently back and forth to break the seal. Be prepared for some water to spill out during this process, and clean up any excess water using a towel or sponge.

Installing the New Toilet Lever

Now that the old lever is removed, it's time to install the new one. Start by wrapping the threads of the new lever's screw with Teflon tape. This will help create a leak-free seal between the lever and the tank, preventing water from leaking around the lever and causing unnecessary wear on the connection.

Begin by wrapping the tape in a clockwise direction, following the direction of the threads. Wrap the tape tightly, ensuring each layer overlaps the previous one by at least half of its width. Make sure to cover the entire threaded area of the lever, but do not wrap the tape too thickly, as this can lead to an improper fit and difficult installation.

AD

Attaching the New Lever

After wrapping the threads with Teflon tape, insert the new lever's screw through the hole in the side of the toilet tank. The lever itself should remain on the outside of the tank, while the threaded screw extends into the tank's interior.

Using your adjustable wrench, turn the nut on the outside of the tank clockwise to secure the lever in place. Tighten the nut firmly, but be careful not to overtighten it, as this can strip the threads or cause the lever to crack. If you feel resistance or the nut becomes difficult to turn, stop and check that you have applied the Teflon tape correctly.

Reassembling and Testing the Flush Mechanism

Once the new lever is secure, it's time to reattach the lift chain to the flush lever arm inside the tank. The lift chain connects the flush handle to the flapper, which releases water from the tank into the bowl when you flush the toilet.

AD

Most toilets use a standard lift chain, which should wrap around the flush lever arm and have a hook or clip that secures the chain to the arm. Make sure the chain is securely attached to the arm and the correct length; it should allow the flapper to lift and close freely when you flush the toilet.

The final step is to test the new toilet lever by turning the water supply valve counterclockwise to restore water flow to the toilet. Once the water is back on, flush the toilet several times to ensure that the lever operates smoothly and the toilet flushes correctly.

As you continue to use your toilet over the coming days and weeks, keep an eye out for any leaks or issues with the new lever. If you notice any problems, you may need to adjust the lever's position or tighten the connection to ensure a proper seal. With proper care and maintenance, your new toilet lever should provide many years of reliable service.

AD