how to install kohler cimarron toilet

"How to Install Kohler Cimarron Toilet: Step-by-Step Guide"

By Jessica Rodriguez
AD

Installing a Kohler Cimarron toilet can significantly enhance your bathroom's functionality and aesthetic. This comprehensive guide will walk you through the process, ensuring a seamless and efficient installation.

Before you begin, ensure you have all the necessary tools and materials. You'll need a wax ring, a toilet connector bolt, Teflon tape, a hacksaw, a screwdriver, adjustable wrenches, and possibly a second person to help with positioning the toilet.

Preparation and Positioning

Begin by turning off the water supply to your toilet. Located behind the toilet, the shut-off valve should be clearly visible. If it's not, you may need to remove the tank lid to access it.

AD
a man with long hair and goggles standing in front of a toilet that has instructions on how to install it
a man with long hair and goggles standing in front of a toilet that has instructions on how to install it
How To Install a Kohler Toilet | eFaucets.com
How To Install a Kohler Toilet | eFaucets.com
Kohler toilet seat replacement for one-piece.
Kohler toilet seat replacement for one-piece.

Flush the toilet to empty the tank and bowl. Then, use a sponge or towel to remove any remaining water. Next, disconnect the water supply line from the tank.

Removing the Old Toilet

Loosen the connector nuts at the base of the toilet using an adjustable wrench. Once these are loose, you can remove the connector bolts and clear any old wax from the drain hole.

How To Fix A Kohler Toilet That Runs All The Time
How To Fix A Kohler Toilet That Runs All The Time
Kohler Cimmaron Toilet Tank-to-Bowl Flush Valve leak Calamity - How to Fix DIY
Kohler Cimmaron Toilet Tank-to-Bowl Flush Valve leak Calamity - How to Fix DIY

Carefully lift the toilet off the drain. This may require two people, as toilets can be heavy. Place the old toilet in a suitable location for disassembly and disposal.

Preparing the Drain and Floor

Inspect the drain for any damage. If it's in good condition, you can proceed. If not, repairs may be necessary before installing the new toilet.

AD

Clean the Drake area and the floor beneath it. Ensure it's free of debris and ready for a new wax ring to be installed.

Installing the New Kohler Cimarron Toilet

Unpack your Kohler Cimarron toilet and check that all parts are present and in good condition.

Starting with the tank, attach the new fill valve and bracket. Ensure the water supply connection is taut but not overly tight. Install the flush lever and flush pipe, following the instructions included with your toilet.

AD

Installing the Tank onto the Bowl

Carefully place the tank onto the bowl, aligning the holes on the tank with the bolts on the bowl. Secure the tank to the bowl using the bolt provided. Tighten it using a wrench.

Apply a thin layer of Teflon tape to the threads of the water supply line. Attach the supply line to the tank, ensuring it's securely tight. Connect the other end to the water supply shut-off valve. Turn the water supply back on.

Securing the Toilet to the Floor

Place the new wax ring onto the drain hole. Ensure it's centered and pushed firmly against the drain. Position the toilet onto the wax ring, allowing the bolts to go through the holes in the base of the toilet.

AD

Place washers onto the bolts, then secure them with nuts. Tighten the nuts using a wrench, but be careful not to overtighten and cause the base of the toilet to crack.

Before you flush the toilet, give the wax ring time to seal. This usually takes a few hours. After the seal is set, you can resume normal use of your new Kohler Cimarron toilet. Regular maintenance will ensure its longevity and performance.

AD