how to fix a lazy boy recliner mechanism

"Revive Your Recliner: How to Fix a Lazy Boy Mechanism"

By Michael Anderson
AD

France, 1789. A spirited crowd stormed the Bastille, marking the start of a new era. This was not just a physical triumph but also a symbolic one, embodying a collective shout of resistance against outdated mechanisms. Today, in our modern households, there's another enemy: the recalcitrant Lazy Boy recliner mechanism.

The Lazy Boy recliner, a staple in many homes, is a marvel of modern manufacturing. But like any machine, it can break down, necessitating fixes that might seem daunting at first. Don't worry; we're here to help. Let's dive into how to troubleshoot and fix your Lazy Boy recliner mechanism with these step-by-step guides.

Understanding the Lazy Boy Mechanisms

Before we embark on the repair journey, it's crucial to grasp the basic mechanisms of a Lazy Boy recliner. The primary components are the pivot point, the pull rod, and the reclining mechanism itself. Each of these plays a vital role in the reclining process.

AD
How To Fix Lazy Boy Recliner
How To Fix Lazy Boy Recliner
Electric Recliner Repair: Everything You Need to Know
Electric Recliner Repair: Everything You Need to Know
How to Safely Disassemble Your La-Z-Boy Recliner
How to Safely Disassemble Your La-Z-Boy Recliner

There are two main types of Lazy Boy mechanisms: the older push-pull models and the newer push-back versions. Knowing which type you have is key to identifying the problem and determining the solution.

The Push-Pull Mechanism

The push-pull mechanism uses a pull rod connected to the base that works in tandem with the pivot point to facilitate recline. Issues can arise if these components malfunction, often due to wear and tear or loose connections.

Repair a Recliner Chair Mechanism | DIY Guide
Repair a Recliner Chair Mechanism | DIY Guide
How to Fix a Squeaky Recliner in 5 Practical Steps • Recliners Guide
How to Fix a Squeaky Recliner in 5 Practical Steps • Recliners Guide

Common problems include the chair being hard to recline, refusal to recline at all, or difficulty returning to the upright position. These usually indicate a problem with the pull rod or pivot point.

The Push-Back Mechanism

The push-back mechanism seldom has issues compared to the push-pull models. It uses a spring-loaded mechanism attached to the back of the chair, which makes it simpler in design and less prone to problems. But even these can face occasional issues, like the chair not returning to the upright position correctly or a stuck recline.

AD

The focus of this guide will be on the push-pull mechanism, as it's the older, more complex model that typically needs more maintenance.

Identifying the Problem

Before you dive into your toolbox, spend some time troubleshooting to avoid unnecessary work. Start by checking the obvious: is the recliner unplugged or turned off (if electric)? Is there any debris clogging the mechanism?

Next, do a quick test of the manual recline feature. If your chair is electric, toggle the reclining button to see if it works. If not, the problem might be electrical rather than mechanical. This isn't our focus here, but it's a starting point to diagnose the issue.

AD

Wobbly Recline

A wobbly recline is often indicative of a loose pivot point or an incorrect hole setting. The pivot point is where the seat and backrest pivot to allow recline. If it's too loose, the chair might wobble.

To tighten the pivot point, you'll need to access the underside of the chair. If your chair has a removable bottom cushion or a skirting, remove it for easier access. Once you've located the pivot point, tighten the set screw with an Allen key. Be careful not to overtighten, as this could strip the screw.

Stiff Reclining

If your chair is stiff to recline, the pull rod might be bent or stuck. The pull rod is the long metal bar that pulls the chair into the reclining position when you release the lever.

AD

First, check if the rod is straight. If it's bent, you'll need to replace it. To do this, unplug the chair (if electric), then locate the release lever under the seat. Pull the trigger, and the rod should slot out of its housing. Replace with a new one, ensuring it's properly aligned before fitting it back into the housing.

If the rod isn't bent, check for any kinks or obstructions. If you find any, straighten or remove them. Sometimes, applying a bit of lubricant to the mechanism can help ease the motion. Always ensure you use a suitable, high-quality lubricant to avoid any future damage.

Performing a Full Overhaul

Sometimes, the best way to fix a Lazy Boy recliner mechanism is to perform a full overhaul, replacing all the worn-out parts. This ensures your chair is in top working condition and prolongs its lifespan.

Follow these steps to replace all the major components:

Gaining Access

First, get under your chair and locate all the necessary bolts and screws. You might need a screwdriver, an Allen key, or a power drill for this. Once you've undone all the screws, carefully lift off the bottom panel.

Removing the Mechanism

With the bottom panel removed, locate and disconnect any wires attached to the mechanism. Then, locate the three bolts that secure the mechanism to the chair's frame. Remove these, again using the appropriate tools for the job.

With the bolts removed, the mechanism should slid out of its position. If it's stuck, be patient and leverage a pry bar to carefully remove it.

Replacing Components

Once the mechanism is out, start replacing the worn-out parts. This will include the pivot point, the pull rod, and any other relevant components. If you're unsure, consult your chair's manual or look up a video guide online for your specific make and model.

Ensure you align the new components correctly and tighten the screws using the appropriate tool and technique.

Reassembling the Chair

With all the new components in place, reverse the steps you took to remove the mechanism. Secure it tightly to the frame, ensuring the wires are properly connected if your chair is electric.

Test the recline functionality to ensure all parts are working smoothly. If the chair still doesn't recline properly, double-check all the components and ensure they're all correctly aligned and tightened.

And there you have it - your Lazy Boy recliner should now be as good as new, ready to provide you with decades of comfort and support. Regular maintenance checks and timely repairs are the keys to ensuring your Lazy Boy recliner mechanism continues to perform seamlessly, just like the Bastille without its prisoners. Happy fixing!

AD