how to reupholster a lazyboy recliner

"Rejuvenate Your Recliner: Step-by-Step Lazy Boy Upholstery Guide"

By Richard Thompson
AD

Reupholstering a La-Z-Boy recliner can not only update its look but also help it blend seamlessly with your new home decor. This task might seem daunting at first, but with the right tools and techniques, you can transform your old, worn-out chair into a stylish and comfortable piece of furniture that reflects your personal taste. Here's a step-by-step guide to help you achieve this. Let's dive in.

Before we begin, it's crucial to gather all the necessary tools and materials. Having everything readily available will save you time and hassle during the process. You'll need the following: a staple gun, foam glue, scissors, a screwdriver, a utility knife, sandpaper, a vacuum cleaner, new fabric (ensure it's durable and suitable for upholstery), and of course, your La-Z-Boy recliner.

Preparation and Disassembly

The first step is to prepare your workspace and disassemble the chair. Clear a large, well-lit area where you can work comfortably, and lay down drop cloths to protect your floor. Now, let's take your chair apart.

AD
Repairing LazyBoy Recliners
Repairing LazyBoy Recliners
DIY: Reupholster An Old La-Z-Boy Recliner
DIY: Reupholster An Old La-Z-Boy Recliner
DIY: Reupholster An Old La-Z-Boy Recliner
DIY: Reupholster An Old La-Z-Boy Recliner

Start by removing the back and seat cushions. These are usually attached with Velcro or staples. If they're stapled, use your utility knife to cut the fabric and staples, and carefully peel back the old material. Next, remove any tack strips or webbing using your screwdriver. Finally, disconnect the electrical components, if your chair has power recline features, by unbinding the wires and taping them carefully.

Clean and Sand

Now that your chair's frame is exposed, clean it thoroughly to remove any dust or debris. Use fine-grit sandpaper to lightly sand the frame, focusing on any rough areas. This helps create a smooth surface for your new fabric to adhere to. After sanding, wipe the frame with a damp cloth to remove any residue.

Reupholster a Recliner: a DIY Guide
Reupholster a Recliner: a DIY Guide
How to Reupholster a Recliner? – Step-By-Step Guide
How to Reupholster a Recliner? – Step-By-Step Guide

If your chair has wooden components, inspect them for any signs of damage or wear. If necessary, sand them lightly and apply a new coat of paint or stain to revitalize their appearance. Remember to allow the paint or stain to dry completely before moving on.

Check and Prepare the Mechanisms

Next, ensure all the reclining and swiveling mechanisms are functioning correctly. Lubricate them if needed to keep your chair moving smoothly. Also, check the frame for any loose screws or bolts, and tighten them as necessary.

AD

Before you proceed with reupholstering, make sure to take measurements of each component, including the backrest and seat, to ensure you purchase enough fabric. Additionally, consider the pattern repeat if using a patterned fabric to calculate how much material you'll need.

Reupholstering the Frame

With your chair's mechanisms checked and the frame prepared, it's time to start reupholstering. Lay out your new fabric, and begin by attaching it to the frame using foam glue or a staple gun. Work in small sections, pulling the fabric taut but not stretched.

Start with the backrest, as it's usually the largest and most visible part. Place the fabric face down, and then carefully position the backrest onto it, ensuring the fabric is centered. Secure the fabric at the top of the backrest first, and then work your way down the sides and bottom, using your utility knife to trim any excess material as you go.

AD

Reupholstering the Seat

Next, reupholster the seat using the same method. Remember to consider the chair's mechanism and any cut-outs for the reclining and swiveling features. Ensure these areas are free from fabric to maintain the chair's functionality.

If you'd like to add extra cushioning or support, now is the time to do it. Cut your foam or batting material to fit within the frame, and attach it using foam glue or by securing it underneath the fabric with staples. Always keep the weight and balance of the chair in mind when adding extra padding.

Reupholstering the Arms and Other Components

Finally, reupholster any arms or other components, following the same process as the backrest and seat. If your chair has unique features like a built-in Ottoman or headrest, ensure these are reupholstered appropriately, and remember to take into account any electrical components or mechanisms.

AD

Once all components are reupholstered, it's time to reattach them to the chair's frame. Begin by connecting the electrical components, if necessary, and then attach the backrest, seat, and any other components, ensuring they're all secure and functioning correctly. Use your staple gun or foam glue to attach any loose fabric or edges.

With everything reattached, vacuum your chair to remove any lingering dust or debris. Admire your beautiful, newly reupholstered La-Z-Boy recliner. Not only has it been revitalized, but it also represents your unique style and creativity. Enjoy your cozy, comfortable chair, and the satisfaction of a job well done!

AD