how to remove lazy susan

Revive Your Cabinet: How to Remove a Lazy Susan

By Michael Lopez
AD

Ever found yourself grappling with a stuck or broken lazy Susan in your kitchen cabinet? Removing a lazy Susan, especially when it's stuck or damaged, might seem daunting. But fear not, with the right techniques and a little patience, you can say goodbye to that troublesome spinning shelf. Let's dive into how to remove a lazy Susan step by step.

Before we start, gather your tools. You'll need a screwdriver (usually Phillips), a flathead screwdriver, needle-nose pliers, a butter knife, and perhaps some vegetable oil or WD-40 for lubrication. Now that you're armed let's proceed with caution and tackle this task one step at a time.

Preparing the Cabinet

Before attempting to remove the lazy Susan, ensure the cabinet is empty. This step might seem obvious, but it's crucial for maintaining your safety and the shelf's stability during the removal process.

AD
Out with the Old, In with the Organized: Transforming Your Space from Lazy Susan to Luxe Shelving!
Out with the Old, In with the Organized: Transforming Your Space from Lazy Susan to Luxe Shelving!
Clean a Lazy Susan Easily
Clean a Lazy Susan Easily
an open kitchen cabinet with pots and pans in the bottom drawer on the counter
an open kitchen cabinet with pots and pans in the bottom drawer on the counter

Next, assess the damage. If the lazy Susan is stuck due to rust or debris, you might need to use lubricant. If the damage is extensive, like a broken pivot or base, you might need to replace the entire unit. In such cases, taking it to a professional might be your best bet.

Unscrewing the Lazy Susan

Start by locating the screws holding the lazy Susan in place. They are usually found at the back of the cabinet, under the shelf's overhang or on the inside of the cabinet sides. Use your Phillips screwdriver to remove these screws. If they're stripped or too tight, use needle-nose pliers to grip them more securely.

four pictures show the inside of a kitchen cabinet with trash cans and other items in it
four pictures show the inside of a kitchen cabinet with trash cans and other items in it
DIY Transformation: Turning a Lazy Susan into Stylish Open Shelving
DIY Transformation: Turning a Lazy Susan into Stylish Open Shelving

If the screws are stripped or the heads are damaged, you might need to use a flathead screwdriver to push the screw through from the other side. Alternatively, you can use an extraction tool specifically designed for removing damaged screws.

Freeing the Lazy Susan

Once all the screws are removed, the lazy Susan should be loose. If it's still stuck, try gently lifting it to break the seal between the shelf and the cabinet's bottom. You might need to use a butter knife or a flathead screwdriver to pry it up gently.

AD

If the shelf is still stuck, apply a lubricant along the sides and bottom of the lazy Susan. Allow it to sit for a few minutes to penetrate any rust or debris. Then, try to lift the shelf again. If it's still not budging, you might need to apply more force, but be careful not to damage the cabinet.

Removing the Pivot Assembly

With the lazy Susan removed, you'll see the pivot assembly attached to the cabinet. This assembly consists of a post and a bearing, which allows the shelf to spin.

To remove the pivot assembly, you'll need to unscrew it. Use your screwdriver to turn the nut counterclockwise. If it's too tight, use your needle-nose pliers to grip it more securely. Once the nut is removed, you should be able to lift the entire assembly out of the hole.

AD

Cleaning the Mounting Hole

Before installing a new lazy Susan or using the old one, clean the mounting hole in the cabinet. Remove any debris or rust using a wire brush or a suitable cleaner. Ensure the hole is dry before proceeding to the next step.

If you're reinstalling the same lazy Susan, wipe it clean as well. If not, install your new lazy Susan using the reverse process of removal. Ensure the screws are tight and the pivot assembly is secure before you let the spinning commence.

Disposing or Reusing the Old Lazy Susan

Once the process is complete, you're left with a decision: dispose of the old lazy Susan or find a way to reuse it. If the lazy Susan is in good condition, consider donating it, selling it, or repurposing it for another use, like a rotating garden planter or a kids' toy.

AD

If you choose to dispose of it, check your local waste management guidelines for hazardous materials. Some components may be hazardous, like lead in the bearings, and should be disposed of responsibly.

Removing a lazy Susan can be a daunting task, but with the right tools and patience, it's well within your capabilities. Always remember to prioritize safety, and if in doubt, don't hesitate to call a professional. Happy spinning!

AD