How to Drain Water from Whirlpool Washing Machine
Finding water in your Whirlpool washing machine after a cycle can be frustrating. While this isn't ideal, you don't necessarily need to call in a professional right away. There are several simple methods you can try to drain the excess water yourself. This guide will walk you through the process step-by-step, ensuring you understand exactly what you're doing.
Before we dive in, remember that safety should always be your top priority. Ensure the machine is unplugged and turned off before you start. Also, wear rubber gloves to protect your hands from any fluid or insects that might be present. Now, let's get started.
Basic Techniques to Drain Water from Your Whirlpool Washing Machine
These methods are suitable for minor water accumulation and should be your first line of action.
Before using any of these techniques, ensure your machine is on a flat surface. If it's not, your balance could be compromised, leading to further issues.
Manual Draining
One of the simplest ways to remove water from your Whirlpool washing machine is by siphoning it out manually. This requires patience and a little flexibility, but it's a highly effective method.
Here's how to do it:
- First, prepare a long, empty plastic tube. A garden hose works well.
- Next, submerge one end of the tube into the water, ensuring it's at the deepest point of your machine's drum.
- Place the other end of the tube in a container or outside your house.
- Now, carefully remove the tube, creating a siphon effect. The water should drain out.
Using a Shop Vacuum
If you have a shop vacuum lying around, you can use it to drain excess water from your washing machine. It's faster than manual siphoning and requires less effort.
Here's how to do it:
- Start by ensuring your shop vacuum is set to the wet mode.
- Attach the vacuum hose to your machine's drain pump filter opening.
- Turn on the vacuum, and it should suck out the water.
Addressing Water Accumulation in the Underbelly of Your Machine
If your Whirlpool washing machine is accumulating water in the underbelly, several issues might be at play. The next set of techniques will help you tackle these problems.
Before proceeding, ensure you have unplugged your machine and disconnected the water supply hose. Also, place a tray or large container under the machine to catch any water that may leak.
Checking the Drain Pump
The drain pump is responsible for moving water out of your machine. If it's clogged or faulty, water may accumulate in the machine or under it.
Here's how to check and replace the drain pump:
- First, locate the drain pump behind the access panel at the bottom of your machine.
- Remove the panel and check the drain pump for blockages, like clothing lint, debris, or soda caps.
- If you find any blockages, clean them out carefully. If the pump is loose or damaged, replace it.
Inspecting the Drain Hose and Filter
Kinks, clogs, or leaks in the drain hose can cause water to accumulate in and under your Whirlpool washing machine. The same applies to the drain filter.
Here's how to inspect and clear these components:
- Start by checking the drain hose for kinks or leaks. If you find any, fix or replace the hose.
- Next, locate the drain filter at the bottom front of your machine.
- Remove it and clean any lint or debris you find. If the filter is damaged, replace it.
By following these steps, you should be able to drain water from your Whirlpool washing machine and address any underlying issues. However, if the water problem persists even after trying these techniques, it's time to call a professional.
Regular maintenance is key to keeping your washing machine in top condition. Make a habit of checking your machine periodically to ensure it's working correctly. This will help you identify and fix issues early, saving you time and money in the long run.
Happy machine maintenance!