how to clean the carburetor on a craftsman snowblower

How to Clean a Craftsman Snowblower Carburetor

By John Wilson
AD

Winter's chill doesn't have to mean your outdoor chores come to a halt. Keep your Craftsman snowblower in top shape with regular maintenance, and it'll help you tackle those snow-packed driveways with ease. Carburetor cleaning is a pivotal part of this maintenance, directly affecting your snowblower's performance. Here's a step-by-step guide to help you ensure your machine is always winter-ready.

Before we dive in, remember that safety is paramount. Always disconnect the spark plug wire to prevent any accidental starting while performing maintenance. Now, let's get down to business.

Gathering Your Tools and Materials

Before you begin, ensure you have the following tools and materials handy:

AD
HOW TO CLEAN A CARBURETOR ON A CRAFTSMAN 179CC SNOWBLOWER FOR BEGINNERS
HOW TO CLEAN A CARBURETOR ON A CRAFTSMAN 179CC SNOWBLOWER FOR BEGINNERS
Best Tips In Cleaning A Snowblower Carburetor To Keep It In Good Condition
Best Tips In Cleaning A Snowblower Carburetor To Keep It In Good Condition
How To Remove & Clean The Carburetor On An MTD/Craftsman 2-Stage Snowblower
How To Remove & Clean The Carburetor On An MTD/Craftsman 2-Stage Snowblower

  • Screwdriver (usually a Phillips head)
  • Rubber gloves
  • Wire brush or toothpick
  • Carburetor cleaner spray (like WD-40 or Gasket & Seal Remover)
  • Paper towels or old rags
  • Replacement gaskets (if necessary)

Best Tips In Cleaning A Snowblower Carburetor To Keep It In Good Condition
Best Tips In Cleaning A Snowblower Carburetor To Keep It In Good Condition
CRAFTSMAN TECUMSEH 5.5HP 24\
CRAFTSMAN TECUMSEH 5.5HP 24\

Accessing the Carburetor

To access the carburetor, you'll need to remove some panels around the engine. This typically involves unscrewing a few bolts and carefully removing the covering. Consult your Craftsman snowblower's manual for specific instructions.

Once exposed, you'll see the carburetor's main body. It's a metal part connected to the engine via a rubber gasket, with fuel lines and an cable connected to it.

AD

Cleaning the Outer Carburetor

First, disconnect the fuel line at the carburetor's base. Have a container ready to catch any spilled fuel.

Now, grab your carburetor cleaner spray and, wearing gloves, give the outer surface a good spray. Be sure to get both the top and sides, and let the cleaner soak for a few minutes to break down any grime. Use your wire brush or toothpick to gently scrape off the loosened dirt. Wipe clean with a rag or paper towel.

Disassembling the Carburetor

Before you proceed, ensure you have a clear, well-lit workspace. Lay out your parts in the order you remove them to make reassembly easier. Use your screwdriver to remove the nuts and bolts holding the carburetor together.

AD

Gently separate the two halves, keeping track of the springs, needles, and gaskets. Place the halves in a safe spot, like a towel or tray, to prevent them from getting scratched or damaged.

Deep-Cleaning the Carburetor's Internal Parts

Using your carburetor cleaner spray, thoroughly clean each part, paying special attention to the jets and MOS ( membranous opening system) that control the fuel flow. Soak them in the cleaner, then use your wire brush or toothpick to scrub away any deposits.

If any of the internal parts, like the gaskets, are broken or worn, replace them before reassembly. You can buy replacements at hardware stores or online.

AD

Reassembling the Carburetor

Before you begin, double-check that all parts are clean and free of debris. Reassemble the carburetor by reversing the disassembly process, making sure everything is properly aligned and secured. Wipe any excess cleaner from the outer surfaces.

Reconnect the fuel line and the cable. Ensure everything is secure and Nothing is leaking. Reattach any panels you removed earlier, and double-check that everything is properly tightened and in place.

Testing Your Craftsman Snowblower

Reconnect the spark plug wire. Start the engine and let it run for a few minutes to ensure it's working properly. You should notice improved performance, with the engine running smoother and more efficiently.

If your snowblower's performance doesn't improve, or if you encounter any issues, double-check your work and ensure all parts are correctly assembled and connected.

There you have it - your Craftsman snowblower is now ready for those wintery challenges. With regular cleaning and maintenance, you'll ensure it serves you well for many snowy seasons to come. Happy snowblowing!

AD