how to clean a ruger 10/22 takedown

Clean Ruger 10/22 Takedown: Step-by-Step Guide

By Joshua Rodriguez
AD

The Ruger 10/22 takedown, a popular rimfire rifle, is known for its reliability and accuracy. However, like any firearm, regular cleaning is crucial to maintain its performance and longevity. Here's a comprehensive guide on how to clean your Ruger 10/22 takedown, ensuring you understand and follow each step for optimal results.

Before you begin, gather all the necessary tools and equipment. You'll need a cleaning kit, bore snake or cleaning rod, cleaning solvent, lubricant, cotton swabs, and a suitable place to clean. Also, ensure the rifle is safe and unloaded before starting.

Disassembly and Initial Cleaning

The first step in cleaning your Ruger 10/22 takedown is disassembling it. Due to its takedown design, this is quite straightforward. Simply remove the barrel and receiver by pulling them apart, and separate the bolt from the bolt cartridge.

AD
EASILY Clean the Ruger 10/22
EASILY Clean the Ruger 10/22
Tim's Take: Ruger 10/22 Takedown Cleaning
Tim's Take: Ruger 10/22 Takedown Cleaning
How to Field Strip a Ruger 10/22 Rifle for Cleaning
How to Field Strip a Ruger 10/22 Rifle for Cleaning

Start by cleaning the exterior. Use a dry, soft brush to remove any dirt or debris from the outer surfaces. Be careful around the sights and ejection port.

Cleaning the Barrel

The barrel is the heart of your rifle, affecting accuracy and reliability. Begin by running your bore snake or cleaning rod through the barrel, ensuring you pull it straight through without scrubbing.

Ruger 10/22 Cleaning
Ruger 10/22 Cleaning

Once you've pushed the cleaning patch through, examine it. If it's dirty, repeat the process until the patch comes out clean. Then, apply a few drops of lubricant to a clean patch and push it through the barrel to protect and preserve the bore.

Cleaning the Receiver and Bolt

The receiver and bolt are exposed to a lot of carbon buildup, which can affect functionality. Use a variety of brushes and swabs to clean all parts of the receiver, including the trigger group and magazine well.

AD

For the bolt, use a combination of solvent and brushes to remove any carbon or fouling. Pay special attention to the bolt face, extractor, and ejector. Use cotton swabs to clean hard-to-reach areas.

Reassembly and Final Touches

After everything is clean, it's time to reassemble your Ruger 10/22 takedown. Start by reattaching the bolt to the bolt cartridge, then slide the barrel and receiver back together.

Once assembled, perform a function check to ensure everything is moving smoothly. If the rifle is functioning properly, apply a light coat of lubricant to the external moving parts, such as the bolt and magazine release.

AD

Congratulations, you've successfully cleaned your Ruger 10/22 takedown! Regular cleaning will keep your rifle in top shape and ensure many years of reliable service. Happy shooting!

AD