how to clean ruger lc9s

Effortlessly Clean Your Ruger LC9s: Step-by-Step Guide

By Joseph Anderson
AD

Keeping your Ruger LC9s in top conditioning is not just about aesthetics; it's also about ensuring safe and optimal performance. Regular cleaning is a crucial aspect of firearm maintenance, and here we'll guide you through the process of cleaning your Ruger LC9s in a comprehensive, step-by-step manner.

The process involves disassembly, cleaning, lubing, and reassembly. Before we start, ensure you have the necessary cleaning supplies: a bore cleaning kit, a disassembly tool, a cleaning rod,ekar proofing solvent, and lubricant designated for firearms.

Safe Disassembly and Inspection

Before you begin, make sure your LC9s is unloaded and the magazine is removed. Check that no ammunition is in the chamber. According to gun safety rules, always treat your firearm as if it were loaded to avoid accidents.

AD
✔️ Ruger LC9s Pro disassembly and reassembly®
✔️ Ruger LC9s Pro disassembly and reassembly®
ruger lc9 cleaning and lubrication (EDC)
ruger lc9 cleaning and lubrication (EDC)
Take Apart, 10 Things
Take Apart, 10 Things

Using your disassembly tool, push out the takedown pin, rotate the slide slightly, and slide it off the frame. Remove the captive recoil spring assembly from the slide. Be cautious as the recoil spring can be quite powerful.

Cleaning the Barrel

Place a bore brush onto your cleaning rod and apply some CLP (Cleaner, Lubricant, Protector) onto the brush. Run the brush through the barrel from the chamber end to the muzzle end in short, quick strokes. This will dislodge any carbon or debris.

Ruger LCP .380 Breakdown Take Apart and Clean
Ruger LCP .380 Breakdown Take Apart and Clean
How to clean the Ruger SR40
How to clean the Ruger SR40

Next, run a bore snake through the barrel a few times to remove any residue left behind by the brush. Your barrel should now be clean and ready for reassembly.

Cleaning the Slide

The slide can be cleaned with CLP and a rag. Apply CLP to a patch and wipe the interior and exterior of the slide. Pay particular attention to the rails and the ejection port. Use a credit card or plastic scrape to remove any buildup in the ejection port.

AD

Use a toothbrush to clean the firing pin channel and the extractor. Ensure all parts are dried off before lubing and reassembly.

Lubrication

Once all parts are clean and dry, it's time to lubricate them. Apply a small amount of firearms-specific lubricant to the rails of the slide and frame. Lubricate the barrel hood, the ejection port, and the trigger mechanisms, but avoid over-lubricating as this can attract dirt and debris.

Ensure the slide moves smoothly over the frame and the trigger pulls cleanly. If not, adjust the lubrication accordingly.

AD

Reassembly

Reassembling your LC9s is the reverse of disassembly. Make sure the captive recoil spring assembly is correctly seated in the slide before reinserting the takedown pin. Gently pull back the slide to ensure it operates smoothly.

Before storing, function check your LC9s without live ammunition to ensure everything is working correctly. Always check and maintain your firearm regularly to prolong its life and ensure optimal performance.

Regular cleaning is a testament to your commitment to safety and the longevity of your Ruger LC9s. It's not just about the visible cleanliness but the unseen aspects, like the barrel's bore and the mechanics' smooth operation. Happy shooting!

AD
AD