how to clean a ruger security 9

Ruger Security 9 Cleaning Guide: Step-by-Step

By Ashley Thompson
AD

Cleaning a Ruger Security 9 handgun is a crucial maintenance task that ensures your firearm's reliability and longevity. Regular cleaning removes dirt, copper, powder residue, and other contaminants that can accumulate during shooting, potentially affecting performance and durability. Here's a step-by-step guide on how to clean your Ruger Security 9 effectively.

Before you begin, gather your cleaning kit, including a bore brush, chamber brush, patch holder, cotton swabs, cleaning solvent, lubricant, and a few rags. Safety is paramount, so ensure your firearm is unloaded and the magazine is removed before starting.

Disassembly and initial cleaning

The first step in cleaning your Ruger Security 9 is disassembling it. Start by checking if the firearm is unloaded and clear the chamber by pulling the trigger and ejecting the magazine, if present. Use the takedown lever on the left side of the gun to separate the slide assembly from the frame.

AD
✔️ Ruger LC9s Pro disassembly and reassembly®
✔️ Ruger LC9s Pro disassembly and reassembly®
EASILY Clean the Ruger 10/22
EASILY Clean the Ruger 10/22
Best 9mm Cleaning Kit: Reviews of the Top 4 Choices
Best 9mm Cleaning Kit: Reviews of the Top 4 Choices

Inspect the interior of both components for any visible fouling or residue. If necessary, use a dry, clean cloth or a bore brush to wipe away loose debris. Pay special attention to the barrel, chamber, and extracting grooves, as these areas often accumulate the most residue.

Cleaning the barrel

One of the most critical components to clean is the barrel, as it directly impacts accuracy and reliability. Attach a bore brush to a cleaning rod or an appropriately-sized patch holder, and dip it in a suitable cleaning solvent. Run the brush back and forth through the bore, ensuring you cover the entire length of the barrel.

How to clean the Ruger SR40
How to clean the Ruger SR40
How to Clean a Semi-Automatic Pistol - DIY Prepper
How to Clean a Semi-Automatic Pistol - DIY Prepper

After brushing, use a clean patch to wipe away any remaining residue. Repeat this process several times until the patches come out clean. Once the barrel is clean, use a dry patch to removed any excess solvent, followed by a lightly oiled patch to protect the steel and facilitate smoother cycling.

Cleaning the chamber and action components

Next, focus on the chamber and action components, which include the firing pin, extractor, and ejector. Use a chamber brush or cotton swabs to apply cleaning solvent to these areas and thoroughly scrub away any fouling. Be sure to clean the ejector cut and the interior of the slide as well.

AD

Once you've removed all visible residue, dry the components with a clean cloth or allow them to air dry. Before reassembly, apply a light layer of lubricant to the rails, locking block, and other moving parts to ensure smooth operation and protect against corrosion.

Reassembly and functional test

Now that your Ruger Security 9 is clean and lubricated, it's time to reassemble the firearm. Align the slide assembly with the frame and use the takedown lever to mate the two pieces. Ensure the weapon is still unloaded and confirm that the chamber and magazine catch are functioning correctly.

Perform a dry fire test by puling the trigger while pointing the gun in a safe direction. The trigger should move smoothly and reset without any excess resistance or hang-ups. If everything feels and sounds right, your Ruger Security 9 is now ready for safe storage or further range testing.

AD

Regular cleaning and maintenance are essential to keep your Ruger Security 9 functioning at peak performance. By following this guide and making a habit of cleaning your firearm after each shooting session, you'll extend its lifespan and ensure it's always ready for use. Safe shooting!

AD