how to change the oil on an ariens snowblower

Step-by-Step: How to Change Oil on an Ariens Snowblower

By John Robinson
AD

Regular maintenance is key to ensuring your Ariens snowblower continues to operate at peak performance. One of the most crucial tasks in this regard is changing the oil, which not only keeps the engine running smoothly but also helps extend its lifespan. This comprehensive guide will walk you through the process step-by-step, ensuring you get the job done safely and efficiently.

Before we dive into the process, ensure you have the following tools and materials on hand: a wrench, an oil filter wrench, a funnel, a drain pan, new oil (check your owner's manual for the correct type and amount), and a new oil filter. Additionally, make sure your snowblower is cool to the touch; it's best to change the oil after the engine has been off for about 30 minutes.

Preparation

Prior to starting, lay down a protective sheet or tarp to catch any oil spills. This will save you time and effort in cleaning up afterwards. It's also a good idea to have some rags or paper towels on hand to wipe your hands and tools as you work.

AD
How To Change The Oil In Your Ariens Snowblower
How To Change The Oil In Your Ariens Snowblower
5 Best Snowblower Oils Reviewed in Detail (Summer 2026)
5 Best Snowblower Oils Reviewed in Detail (Summer 2026)
Ariens Snowblower Maintenance, Oil Change
Ariens Snowblower Maintenance, Oil Change

Locate the oil drain plug and the oil fill hole on your Ariens snowblower. The oil drain plug is usually at the bottom of the engine, while the oil fill hole is located on the top. The exact positions may vary depending on your model, so consult your owner's manual if needed.

Draining the Oil

Position your drain pan underneath the oil drain plug. Using your wrench, loosen and remove the plug by turning it counterclockwise. Allow the oil to drain completely, which may take a few minutes.

Amsoil Synthetic Oil Change in a Snowblower
Amsoil Synthetic Oil Change in a Snowblower
How To Conduct A Snowblower Oil Change
How To Conduct A Snowblower Oil Change

Once all the oil has drained, use a rag or paper towel to wipe the area around the drain plug and the pan to remove any excess oil. This will help you detect any leaks and give you a better understanding of the engine's condition.

Replacing the Oil Filter

Locate the oil filter, which is usually mounted on the side of the engine. Using your oil filter wrench, loosen and remove the filter by turning it counterclockwise. If it's too tight, you can use a towel or piece of rubber to get a better grip.

AD

Before installing the new filter, pour a small amount of new oil into the filter to coat the gasket. This will help create a better seal and make it easier to remove the filter during future oil changes. Screw the new filter onto the engine by hand, turning it clockwise until it's snug. Then, give it about 3/4 of a turn to ensure a good seal. Be careful not to overtighten, as this can damage the filter.

Refilling the Oil

locate the oil fill hole on your Ariens snowblower. Using a funnel, slowly pour the appropriate amount of new oil into the engine. Again, consult your owner's manual for the correct amount.

Allow the oil to settle for a few minutes, then check the oil level using the dipstick. Wipe the dipstick clean with a rag or paper towel, then reinsert it and pull it out again. The oil level should be within the "FULL" range on the dipstick. If it's not, add more oil in small increments until it is.

AD

Checking for Leaks

Start the engine and let it run for a few minutes to allow the new oil to circulate. While the engine is running, check for any signs of leaks around the oil drain plug and oil filter. If everything looks good, shut off the engine and let it sit for another 15-20 minutes to allow the oil to settle.

Recheck the oil level with the dipstick. If it's still within the "FULL" range, you're done! If it's below the "FULL" mark, you may need to add more oil. Keep in mind that it's normal for some oil to remain on the dipstick when it's extracted, but the level should be within the "FULL" range after allowing the engine to sit.

Congratulations, you've successfully changed the oil on your Ariens snowblower! Regular oil changes are an essential part of maintaining your snowblower's engine, helping to keep it running smoothly and extend its lifespan. Now that you know how, you can ensure this critical maintenance task is always at the top of your to-do list. Happy snow blowing!

AD
AD