how to change a shear pin on snowblower

Step-by-Step: Change a Shear Pin on Your Snowblower

By Nicole Lewis
AD

Snowblowers are invaluable tools for clearing snow in the winter, but like any machine, they may need repairs from time to time. One common issue is a broken shear pin. Shear pins are designed to break before other parts of the snowblower to prevent more expensive damage. Replacing a shear pin is a straightforward task, and this guide will walk you through the process step by step.

Before starting, ensure you have the right tools and parts. You'll need a new shear pin (make sure it's the correct size for your snowblower model), a socket wrench, a screwdriver, and possibly a hammer. Also, ensure you're working in a well-lit, safe area, and the snowblower is on a stable surface.

Identifying and Removing the Broken Shear Pin

First, locate the shear pin. It's usually found at the bottom of the snowblower, near the augers. It might be somewhat hidden, so you may need to consult your snowblower's manual for its exact location.

AD
Replacing a Shear Pin - Toro Two-Stage Snow Blower
Replacing a Shear Pin - Toro Two-Stage Snow Blower
Snow Blower Shear Pins FAQ's
Snow Blower Shear Pins FAQ's
How to Maintain a Snow Blower: Top Tips for Peak Performance
How to Maintain a Snow Blower: Top Tips for Peak Performance

Once you've found it, you'll need to remove it. The process can vary slightly depending on your snowblower model, but here's a general approach:

Method 1: Using a Socket Wrench

If the shear pin is screwed in, use a socket wrench to unscrew it. You might need to use some force, so be careful not to strip the threads.

How to replace a snowblower 4-way chute control assembly
How to replace a snowblower 4-way chute control assembly
How to Replace a Snow Blower Belt
How to Replace a Snow Blower Belt

If the shear pin is held in place by a cotter pin, you'll first need to remove the cotter pin. Use a pair of pliers to bend the cotter pin and remove it. Then, use a socket wrench to remove the shear pin.

Method 2: Using a Hammer

If the shear pin is pressed in, you might need to use a hammer to remove it. First, use a screwdriver or a chisel to make a mark on the shear pin so you can align it properly after installing the new one. Then, use a hammer to tap the shear pin out.

AD

Be sure to wear safety glasses when using a hammer to protect your eyes from any debris that might fly out.

Installing the New Shear Pin

Now that the broken shear pin is removed, it's time to install the new one. The process is largely the reverse of removing the old one:

If the Shear Pin is Screwed In

Screw the new shear pin in by hand as far as you can. Then, use a socket wrench to tighten it securely. Make sure not to overtighten it, as this can strip the threads or break the new shear pin.

AD

If necessary, reinstall the cotter pin to secure the shear pin in place.

If the Shear Pin is Pressed In

Align the new shear pin with the mark you made earlier. Then, use a hammer to tap the new shear pin into place. Again, be sure to wear safety glasses.

Once the new shear pin is in place, test your snowblower to ensure it's working properly. If the new shear pin was installed correctly, your snowblower should function as good as new.

AD

Regularly maintaining your snowblower, including checking and replacing shear pins as needed, will keep it in good working order and extend its lifespan. Happy snowblowing!

AD