how to change the oil on a generac generator

Step-by-Step: Change Oil on Generac Generator

By Brian Taylor
AD

Regular maintenance is crucial to ensure the longevity and optimal performance of your Generac generator. One of the most important tasks in this regard is changing the oil, a process that requires a little time and patience but is well within the capabilities of a savvy DIY enthusiast. Let's dive into a step-by-step guide on how to change the oil on your Generac generator.

First, let's highlight the importance of this task. Regular oil changes not only enhance the generator's performance but also extend its lifespan by reducing wear and tear on the engine. Generac recommends changing the oil every 200 hours of runtime or annually, whichever comes first. However, it's essential to consult your specific generator model's owner's manual for precise maintenance guidelines.

Preparation and Gathering Tools

Before you begin, gather all necessary tools and materials to ensure a smooth and efficient process. You'll need the following:

AD
How to Change the Oil in a 22KW Generac Generator - Generac Maintenance - Generac Air Filter Change
How to Change the Oil in a 22KW Generac Generator - Generac Maintenance - Generac Air Filter Change
How To Change Oil In A Champion Dual Fuel Generator
How To Change Oil In A Champion Dual Fuel Generator
How Often Do You Need To Change The Oil In Your Generator?
How Often Do You Need To Change The Oil In Your Generator?
  • New oil (SAE 10W-30 is generally recommended for Generac generators)
  • A wrench that fits your generator's oil filter (usually a 14mm socket wrench)
  • An oil filter (match the specifications of your generator's current filter)
  • An oil filter wrench
  • An oil drain pan
  • Funnel
  • Rags or shop towels
  • Gloves
  • Safety glasses

Once you have everything ready, find a flat, well-lit workspace where you can comfortably perform the oil change.

Draining the Old Oil

Start by turning off and unplugging your generator. Allow it to sit for about 15-30 minutes to let the oil cool and settle. This step is essential to prevent any burn injuries and to allow the oil to drain completely.

Oil change 20kva Generac for my cousin
Oil change 20kva Generac for my cousin
🛢️ Cómo elegir aceite para generadores: la guía que necesitás
🛢️ Cómo elegir aceite para generadores: la guía que necesitás

Using your wrench, locate and loosen the oil pan drain nut gradually. Be cautious not to overtighten the nut during reassembly to prevent stress on the oil pan. Once the nut is loosened, position your oil drain pan directly beneath the oil pan. Carefully remove the drain nut by hand and allow the old oil to drain completely. Ensure you clean any remaining oil from the pan.

Changing the Oil Filter

With the oil drained, it's time to replace the oil filter. First, use your oil filter wrench to loosen the oil filter by turning it counterclockwise. Once the filter is loosened, remove it by hand and discard it responsibly.

AD

Before installing the new oil filter, coat the gasket with a small amount of new oil. This creates a better seal and makes the filter's initial startup easier. Screw on the new oil filter by hand, turning it clockwise until it's snug. Then, give it a final quarter to three-eighths turn. Do not overtighten the oil filter.

Adding New Oil

Now that the oil pan and filter are clean and ready, it's time to fill your generator with fresh oil.

Use your funnel to pour the prescribed amount of new oil into the oil fill hole. Be sure to consult your owner's manual for the correct oil capacity, as it varies by generator model.

AD

Checking the Oil Level

Once you've added the recommended amount of oil, allow it to settle for a few minutes. Then, using the dipstick, check the oil level. Wipe the dipstick clean, reinsert it, and remove it again to check the oil level. The correct oil level should be within the "FULL" range on the dipstick.

If necessary, add more oil to reach the full mark. Be cautious not to overfill, as excessive oil can cause as many problems as too little oil. After checking the oil level, replace the dipstick and oil fill cap.

Final Checks and Disposal

Before you power up your generator, perform a quick final check to ensure everything is in order. Verify that the oil drain nut and oil filter are properly secured, and there are no leaks.

AD

Safely dispose of the used oil and oil filter according to your local regulations. Many auto parts stores and service centers accept used oil for recycling. Double-check if your municipality has specific guidelines for oil disposal.

Congratulations, you've successfully changed the oil on your Generac generator! Regular oil changes are essential for maintaining the health of your generator. Mark your calendar for next year's oil change or every 200 hours of runtime, whichever comes first. Enjoy the peace of mind that comes with knowing your backup power is primed and ready!

AD