how to change the belt on a craftsman belt sander

How to Change the Belt on a Craftsman Belt Sander

By John Rodriguez
AD

When it comes to maintaining your power tools, understanding how to perform routine tasks like changing the belt on your Craftsman belt sander can save you time, money, and unnecessary wear and tear. This article will guide you through the process with step-by-step instructions, ensuring your sander stays in optimal condition.

Before we dive into the process, always remember to unplug your sander and work in a well-lit, safe environment. Now, let's get started!

Understanding Your Craftsman Belt Sander

Familiarizing yourself with your sander's components is the first step. The belt is the abrasive surface that does the actual sanding. It's looped around two pulleys - the idler pulley and the drive pulley. The belt's tension is crucial for ensuring proper sanding performance.

AD
Changing belt on Chraftsman 315.11720 belt sander
Changing belt on Chraftsman 315.11720 belt sander
How to Clean Sandpaper on a Belt Sander
How to Clean Sandpaper on a Belt Sander
How to Use a Belt Sander
How to Use a Belt Sander

Craftsman belt sanders typically use 3" x 21" or 4" x 24" belts. Before you start, ensure you have the correct replacement belt and understand its tensioning system.

Preparation: Gather Tools and Materials

You'll need the following to replace the belt:

The Best Way To Use a Belt Sander
The Best Way To Use a Belt Sander
HOW TO BE A BELT SANDER PRO
HOW TO BE A BELT SANDER PRO
  • A new abrasive belt
  • A flathead screwdriver
  • Adjustable wrench (if your sander has a tension release lever)

Step-by-Step: Changing the Belt

Unplug your sander and locate the tension release lever or the belt tensioning knob on your sander. These mechanisms allow you to adjust the belt's tension.

Here's how to change the belt:

AD
  1. Loosen the tension on the belt using the tension release lever or the belt tensioning knob.
  2. Locate the tracking knob (usually next to the tension release lever) and loosen it as well. This will allow the belt to move freely.
  3. Pull the belt off the drive pulley. You may need to use the end of your flathead screwdriver to help lift it off.
  4. Remove the old belt from the sander completely.
  5. Insert the new belt onto the sanding platen (the flat surface where the belt runs).
  6. Bring the belt around the idler pulley and onto the drive pulley.
  7. Tighten the tracking knob to bring the belt back into position.
  8. Re-tension the belt using the tension release lever or the belt tensioning knob. Check your sander's user manual for the recommended tension level.
  9. Plug in your sander and test it on a scrap piece of wood to ensure it's working correctly.

Tips for Maintaining Your Craftsman Belt Sander

Maintaining your sander will ensure it performs optimally and extends its lifespan. Here are some tips:

Regularly clean your sander to remove any dust or debris that could damage the belt or other components. Inspect the belt for any signs of wear and replace it when necessary. Store your sander in a cool, dry place, and always unplug it when not in use.

Safety First: Proper Belt Tension

Proper belt tension is crucial for safety and performance. A belt that's too loose may slip off the pulleys, while one that's too tight can cause excessive wear and heat, potentially damaging the sander or causing injury.

AD

To check your belt tension, press down on the center of the belt with your thumb. The belt should flex about 1/8" to 1/4". If it's more or less, adjust the tension accordingly.

And there you have it! Changing the belt on your Craftsman belt sander is a straightforward process. With a little practice, you'll be swapping belts like a pro in no time. Happy sanding!

AD