how to change auger belt on craftsman snowblower

How to Change Auger Belt on Craftsman Snowblower

By William Davis
AD

If you're a proud owner of a Craftsman snowblower and you're facing some resistance when trying to start your machine, it might be time to replace the auger belt. Don't worry, this is a straightforward process that you can do yourself. Let's guide you through it.

Replacing the auger belt on your Craftsman snowblower can significantly improve its performance and prevent potential breakdowns. Before you start, ensure you have all the necessary tools and the replacement belt at hand.

Understanding the Auger Belt on Your Craftsman Snowblower

The auger belt is a crucial component of your snowblower. It's responsible for transmitting power from the engine to the auger, which clears snow from your path. If the auger belt is worn out or damaged, it can cause your snowblower to perform poorly or even stop working altogether.

AD
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How to Replace a Snowblower Auger Belt, Troy Bilt, Cub Cadet, MTD, Craftsman Auger Belt Replacement
How to Replace a Snowblower Auger Belt, Troy Bilt, Cub Cadet, MTD, Craftsman Auger Belt Replacement
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation

Replacing the auger belt is a simple task that requires some basic tools and a little bit of your time. Let's dive into the step-by-step process.

Gather Your Tools and the Replacement Belt

Before you start, make sure you have the following tools and parts within reach:

How to Replace a Snow Blower Belt
How to Replace a Snow Blower Belt
How to Replace Belts on a Snowblower
How to Replace Belts on a Snowblower
  • A new auger belt ( matching your snowblower's model and make )
  • A socket wrench
  • A pair of pliers
  • A flathead screwdriver
  • Eye protection

Safety first! Always wear appropriate safety gear, including gloves and eye protection, when working with machinery.

Access the Belts

Start by tilting the snowblower's handle to gain access to the belts. Once you have a clear view, locate the auger belt. It's typically the largest belt on the snowblower, connecting the engine to the auger.

AD

Using a socket wrench, loosen and remove the tension pulley bolt. This will release the tension on the belt, making it easier to remove. Some Craftsman models may have a manual tension pulley that you'll need to release by hand. Consult your snowblower's manual if you're unsure.

Removing the Old Auger Belt

With the tension released, use your pliers to carefully loosen the belt from the pulleys. Start by wiggling one end of the belt off its pulley, then work your way along the belt until it's completely removed.

If the old belt is damaged and difficult to remove, you may need to use a flathead screwdriver to carefully pry it off. Be cautious not to damage the pulleys during this process.

AD

Inspect the Pulleys

Before installing the new belt, take a moment to inspect the pulleys. If any of them show signs of wear or damage, they should be replaced as well. A worn-out pulley can cause unnecessary strain on the new belt, leading to premature failure.

If you notice any issues with the pulleys, it's best to replace them at the same time as the belt to avoid further problems down the line.

Install the New Auger Belt

Lay the new auger belt along the path of the old belt. Start by positioning one end of the belt onto its pulley, then work your way along the belt until it's fully seated in place.

AD

Once the belt is installed, reattach the tension pulley bolt and use a socket wrench to tighten it securely. Ensure the belt has the correct amount of tension. It should have some give, but it shouldn't be so loose that it slips or so tight that it's rigid.

Reassemble and Test Your Craftsman Snowblower

With the new auger belt installed, you can now reassemble your snowblower. Start by returning the handle to its upright position, then give your machine a quick once-over to ensure everything is back in its proper place.

Finally, it's time to test your Craftsman snowblower. Start the engine and observe the new auger belt in action. If it's tracking properly and there are no signs of slippage or excessive noise, you've successfully replaced the auger belt and your snowblower is ready for another season!

Regularly maintaining your Craftsman snowblower, including replacing the auger belt as needed, can help extend its lifespan and keep it running smoothly. Don't forget to check your owner's manual for additional maintenance tips and schedules. Happy snowblowing!

AD