how to change pedals on peloton

Step-by-Step: How to Change Pedals on a Peloton Bike

By Anthony Martinez
AD

First Main Topic

First context paragraph discussing this main topic... Changing pedals on your Peloton bike is a great way to personalize your workout experience or accommodate different types of workout shoes. Safety is paramount in this process, so we've compiled a step-by-step guide to help you swap pedals securely.

Before you begin, ensure you have the right tools: a 15mm pedal wrench, an adjustable wrench, and a protective mat to place your bike on.

Identify the Pedal Types

First detailed paragraph explaining sub-topic A... Your Peloton bike is equipped with pedals suitable for either standard Shimano SPD cleats or Look Delta cleats. Identify which type you have by checking the cleats you currently use or the logo on the pedals themselves.

AD
before and after photo of peloton bike fitting with text overlay reading peloton bike fitting before & after
before and after photo of peloton bike fitting with text overlay reading peloton bike fitting before & after
How to Stabilize a Peloton Bike on Carpet: Fix a Wobbly Peloton
How to Stabilize a Peloton Bike on Carpet: Fix a Wobbly Peloton
How to change the pedals on a Peloton bike
How to change the pedals on a Peloton bike

SPD pedals have a flat, two-bolt interface, while Look Delta pedals feature a three-bolt system.

Remove the Old Pedals

First detailed paragraph explaining sub-topic B... Begin by loosening the pedal's+' (right) side using your 15mm wrench. Turn it counterclockwise until you can use your hands to unscrew it completely. Repeat this process on the '-' (left) side, but remember to turn it clockwise instead, as the left pedal is reversed.

a pair of black shoes sitting on top of a wooden floor next to a candle
a pair of black shoes sitting on top of a wooden floor next to a candle
Peloton Bike Hacks - How To Loosen Your Cleats To Make Clipping In and Out Easier
Peloton Bike Hacks - How To Loosen Your Cleats To Make Clipping In and Out Easier

Once the pedals are removed, clean the pedal threads to ensure a smooth installation of your new pedals.

Second Main Topic

First context paragraph discussing this second main topic... After removing your old pedals, it's time to install your new ones. The process is relatively straightforward, and following these steps will help you secure them properly.

AD

Unpack your new pedals and identify the captive (+' right) and non-captive ('- left') sides.

Thread and Tighten the New Pedals

First detailed paragraph explaining sub-topic C... Place your new pedal onto the crank arm, ensuring the correct side is facing out. Start by hand-tightening the pedal as much as possible, both clockwise for the left pedal and counterclockwise for the right pedal.

Next, using the 15mm wrench, tighten the pedal as much as you can by turning it clockwise once for the left pedal and counterclockwise once for the right pedal.

AD

Secure the Pedals

First detailed paragraph explaining sub-topic D... Using an adjustable wrench, securely fasten the pedal using an 8 to 12 Nm torque. This is usually equivalent to a tightening force of around 70 to 108 lb-in (or 8 to 12 ft-lb). Be careful not to overtighten, as this can cause the pedal to strip or break.

Once tightened, perform the 5-second test: try to turn the crank arm in a continuous, forceful, backward motion for five seconds. If the pedals hold firm, you're all set.

Final closing paragraph... Now that you've successfully changed the pedals on your Peloton bike, you're ready to enjoy a comfortable and secure ride. Don't forget to periodically check the pedal tightness to ensure a safe and enjoyable workout experience. Happy spinning!

AD
AD