how to change jigsaw blade black and decker

"Change Jigsaw Blade Black & Decker"

By Laura Young
AD

Changing a jigsaw blade on a Black and Decker saw might seem intimidating, but with the right steps, it's a simple task. It's important to change the blade when it becomes dull or damaged to ensure safety and precision in your projects. Let's guide you through the process.

Before you start, ensure your tool is unplugged and the blade has stopped moving completely. Always follow safety guidelines to avoid any accidents.

Preparation: Gather Necessary Tools and Safety Equipment

The first step is to gather all the tools and safety equipment you'll need. Apart from your Black and Decker jigsaw, you'll need a new blade that's compatible with your model, a socket wrench (usually 7/16" or 10mm), and safety glasses to protect your eyes.

AD
DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
How to Change a Jigsaw Blade (Step-by-Step Guide for Beginners) | AllFlavor Workshop
How to Change a Jigsaw Blade (Step-by-Step Guide for Beginners) | AllFlavor Workshop
How To Change A Jigsaw Blade
How To Change A Jigsaw Blade

It's also a good idea to have a work surface or vice to hold your saw in place while you change the blade.

Safety First: Wear Protective Gear

Before you begin, put on your safety glasses to protect your eyes from debris. It's also a good idea to wear work gloves to protect your hands from any sharp edges.

Choosing the perfect jigsaw blade in 3 simple steps | FREE DOWNLOAD
Choosing the perfect jigsaw blade in 3 simple steps | FREE DOWNLOAD
How to Use a Jigsaw
How to Use a Jigsaw

Once you're dressed appropriately, find a well-lit, stable workspace to complete the task. This will make the process smoother and less likely to result in errors.

Double-Check Your Saw and Blade Compatibility

Always ensure the new blade you're installing is compatible with your Black and Decker jigsaw model. Using an incorrect blade can damage your tool and reduce the lifespan of both the blade and the saw.

AD

Check your saw's instruction manual or the model number online to confirm the compatibility of your new blade. It's also a good idea to have the new blade's packaging readily available for quick reference.

Removing the Old Jigsaw Blade

Now that you're prepared, let's proceed to remove the old blade from your Black and Decker jigsaw.

Loosen the locking screw on the jigsaw shoe to free the blade (usually located on the underside of the shoe). This will allow the blade to move freely in the arbor, the central hole where the blade is inserted.

AD

Secure the Jigsaw in Position

Place your jigsaw in a vise or secure it to your workbench, ensuring it's stable and won't move during the process. This will make it easier and safer to remove the old blade and install the new one.

Tighten the vise or secure the saw to the bench, ensuring it's sturdy and won't budge. Now, you're ready to remove the old blade.

Removing the Old Blade

Insert the socket wrench into the blade's arbour, which is the central hole in the middle of the blade. Turn the wrench counterclockwise to loosen and remove the old blade.

AD

If the blade is particularly stuck or tight, you might need to use some force, but be careful not to damage the blade or the saw. If it's still not budging, you can try lightly tapping the wrench with a hammer to provide a little extra force.

Installing the New Jigsaw Blade

With the old blade removed, it's time to install the new one. Before you begin, make sure your new blade is clean and free of any debris or lubricants from the packaging.

Also, ensure the blade's teeth are facing the correct direction. The teeth should point towards the back of the jigsaw when the blade is inserted. This will ensure the blade cuts in the correct direction.

Positioning the New Blade

Hold the new blade in position with the teeth facing the correct direction. Insert the blade into the jigsaw arbor, ensuring the tang (the narrow part at the top of the blade) fits securely into the arbor.

With the new blade in position, use the socket wrench to manually spin the arbor clockwise. This will securely tighten the new blade into place.

Tightening the New Blade

Once you've securely inserted the new blade, it's time to tighten it into place. Using the socket wrench, continue turning the arbor clockwise until the locking screw on the jigsaw shoe is snug.

Make sure you don't overtighten the blade, as this could damage the arbor or the blade itself. Instead, tighten it just enough to securely hold the blade in place.

And there you have it - you've successfully changed the blade on your Black and Decker jigsaw. Always remember to follow safety guidelines when using power tools. Now, you're ready to tackle your next project with a sharp, new blade.

AD