how to change a jigsaw blade black and decker

How to Change a Jigsaw Blade on a Black & Decker

By Melissa Taylor
AD

Switching blades on your Black & Decker jigsaw may seem intimidating if you're new to power tools, but don't worry, it can be just as easy as changing a lightbulb once you know the way. Here's a step-by-step guide to walk you through the process, ensuring your safety and jigsaw's longevity.

Before we dive in, remember that safety always comes first when working with power tools. Ensure the jigsaw is unplugged and the blade has cooled down completely to prevent any accidents.

Understanding Your Jigsaw Blade

Your Black & Decker jigsaw came with a variety of blades for different purposes, each marked with a TPI (teeth per inch) number. The most common jigsaw blades are 5/8" and 4" long, with TPI ranging from 4 to 14. The higher the TPI, the smoother the cut, but it also means slower progress through materials.

AD
DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
a person using a power tool on a wood floor
a person using a power tool on a wood floor
How To Change A Jigsaw Blade
How To Change A Jigsaw Blade

For this guide, let's consider the most basic scenario: changing a 4" blade, the most common size.

Removing the Old Blade

Start by ensuring your jigsaw is unplugged. Locate the blade release switch on the side of the tool. It's usually a trigger-like lever that allows you to open the blade release mechanism. Pull this lever gently to open the clamp that holds the blade in situ.

Choosing the perfect jigsaw blade in 3 simple steps | FREE DOWNLOAD
Choosing the perfect jigsaw blade in 3 simple steps | FREE DOWNLOAD
How To Change A Jigsaw Blade
How To Change A Jigsaw Blade

With the clamp open, the blade will drop out due to gravity. Gently pull it out and discard it if it's worn out. Always remember to keep your hands away from the blade's teeth to prevent any accidents.

Installing a New Blade

Now that the old blade is out, it's time to insert the new one. Align the tang of the new blade, the part where it was held in the jigsaw, with the slot in the jigsaw's clamp. Make sure the blade's teeth are pointing downwards, away from the shoe of the jigsaw. The teeth should also align with the kerf or slot your jigsaw's shoe provides.

AD

Once aligned, gently insert the blade into the jigsaw. You should feel the tang of the blade snap securely into the clamp. If it doesn't, it's likely you've not fully aligned the blade. Don't force it, as it might damage the jigsaw's mechanism or the blade itself. Once the blade is fully inserted, release the lever to lock it securely in place.

Safety Checks and First Use

Before you use your jigsaw with the new blade, perform a quick safety check. Ensure the blade is securely fastened, the guard is properly fitted, and the jigsaw's settings are adjusted to match the material you're cutting, usually a slower speed for harder materials and a faster one for softer ones.

Now, plug in your jigsaw and perform a test cut on a piece of scrap wood to ensure everything works smoothly. Remember to start the cut slowly, gaining speed as the cut progresses.

AD

Care and Maintenance of Your Jigsaw Blade

To extend the lifespan of your Black & Decker jigsaw and its blades, regular cleaning and care are a must. After each use, remove the blade, clean it using a suitable lubricant like WD-40 or a blade cleaner, then store in a cool, dry place away from moisture and extreme temperatures.

Regularly inspect your blades for wear and tear. A good rule of thumb is to replace your blade every 10-15 cuts, or when the blade begins to wobble or makes rough cuts. Always follow the manufacturer's guidelines for your specific model and blade type.

Now that you know how to change your Black & Decker jigsaw blade, you're ready to tackle your next woodworking project with confidence and safety. Happy crafting!

AD
AD