how to change blade on black and decker circular saw

Black & Decker Circular Saw Blade Change: Step-by-Step Guide

By John White
AD

Crafting, repairing, or maintaining involves using the right tools, and the versatile circular saw from Black & Decker is a staple in many workshops. When it's time to change the blade, follow this comprehensive guide for a safe and successful process.

Before we dive into the step-by-step process, understanding when and why to change your blade is essential. Regular maintenance includes inspecting the blade for chips, dullness, or bend. When you notice the blade isn't cutting as efficiently or smoothly as it used to, it's time for a replacement.

Preparation for Changing the Blade

Prior to changing the blade, ensure you have the appropriate new blade and necessary tools ready. You'll need a new Black & Decker compatible blade, a Phillips or flathead screwdriver (depending on your saw model), and eye protection.

AD
How to Change a Circular Saw Blade (+ Blade Direction) | Saws on Skates®
How to Change a Circular Saw Blade (+ Blade Direction) | Saws on Skates®
Black and Decker Circular Saw Tutorial and Blade Change Model BDCCS20
Black and Decker Circular Saw Tutorial and Blade Change Model BDCCS20
The Best Black and Decker Circular Saw in 2020
The Best Black and Decker Circular Saw in 2020

Always prioritize safety first. Disconnect the saw from any power source and make sure the blade is not spinning before you begin. Wear proper safety gear, including gloves and full-coverage clothing, to protect yourself during the process.

Removing the Old Blade

To remove the old blade, locate the blade change lever on your Black & Decker circular saw. This lever, usually on the top of the saw, releases the blade when pulled back. Pull the lever and simultaneously press the safety trigger to unlock the blade.

DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
DIY - How To Change The Blade On A Black & Decker Jigsaw - Bob The Tool Man
Circular Saw Blades: How to Change Them and Which Blade to Use
Circular Saw Blades: How to Change Them and Which Blade to Use

Using your screwdriver, loosen the arbor nut located at the center of the blade. Once loose, use your fingers to turn the nut counterclockwise until the blade comes off the arbor. Set the old blade aside carefully to prevent injury from the sharp edge.

Installing the New Blade

Inspect your new blade to ensure it's compatible with your Black & Decker circular saw. The blade's diameter and teeth should match what you're replacing. Position the new blade on the arbor, lining up the arrow on the blade with the arrow on the saw for proper directional cutting.

AD

Replace the arbor nut and tighten it using the screwdriver. Tighten securely but not overtightened, typically to the manufacturer's recommended torque. Push the blade change lever down, locking the blade into place. You're now ready to test your saw with the new blade.

Post-Change Blade Care and Safety

After changing the blade, carefully reconnect your Black & Decker circular saw to a power source. Test the saw by gently starting the blade and allowing it to spin for a few seconds. Check for any signs of abnormality in the blade's movement or strange noises from the saw.

Always remember to store your saw and extra blades in a safe, secure place to prevent accidents. Regularly clean the saw's exterior and interior, and use a general-purpose cleaner to remove any sawdust or debris from the changing area.

AD

Dull Blade Care

Even with a new, sharp blade, regular use will eventually dull it. Rotating the blade in the opposite direction can help even out wear. If you notice your blade isn't cutting as efficiently, consider sharpening it or replacing it completely.

Some professional woodworkers choose to hone their circular saw blades at home with a sharpening kit, but this requires expertise and practice. If you're unsure, it's safer and more cost-effective to simply replace the blade.

Regularly changing and maintain blade on your Black & Decker circular saw helps ensure optimal performance and extends the life of your tool. Stay safe, and happy crafting!

AD
AD