how to change ford focus brake light

How to Change Ford Focus Brake Light

By Michael Smith
AD

If you're experiencing burntouts or flickers with your Ford Focus' brake lights, it might be time for a replacement. Don't worry, changing them isn't as daunting a task as it may seem. This step-by-step guide will walk you through the process, ensuring you're back on the road safely and quickly.

Before we dive in, ensure you have the correct replacement bulbs. For Ford Focus, you'll need #194 or W5W bulbs. Also, gather a flathead screwdriver, pliers, and a ratchet set. Let's get started!

Accessing the Brake Light Assembly

Before you can change the bulbs, you'll need to access the brake light assembly. The process differs slightly between Focus models, so let's cover both.

AD
Easy 2003 Ford Focus Tail Light Bulb Replacement Procedure Hatchback. - Not Sealed
Easy 2003 Ford Focus Tail Light Bulb Replacement Procedure Hatchback. - Not Sealed
How To Change A Brake Light Bulb In A Car - Ford Focus
How To Change A Brake Light Bulb In A Car - Ford Focus
How To Change A Brake Light Bulb – Storables
How To Change A Brake Light Bulb – Storables

For 2012 and earlier models:

Removing the Interior Trim

Start by opening your trunk and removing the cover behind the rear seats. Then, use a flathead screwdriver to pry off the trim panel at the rear of the car. This will expose the brake light assembly. Be careful not to damage the surrounding plastic.

Change a Brake Light
Change a Brake Light
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !

Dislodging the Brake Light Assembly

Next, locate the two Torx screws (T30) at the bottom of the brake light assembly. Unscrew them using your ratchet set. After removing the screws, gently pull the assembly away from the car to disengage the electrical connectors. You should now have easy access to the bulb sockets.

Replacing the Brake Light Bulbs

Now that you've accessed the bulbs, let's replace them with the new ones.

AD

Removing the Old Bulbs

Before you begin, ensure your vehicle is turned off to avoid any electrical shorts. Use your pliers to squeeze the retaining clip on the side of the bulb socket. This should release the bulb socket, allowing you to pull the bulb out.

Inserting the New Bulbs

Take your new #194 or W5W bulb and insert it into the socket. Make sure the flat side of the base aligns with the flat side of the socket. Gently push the bulb until it clicks into place. Then, release the retaining clip to secure it. Repeat this process for the other bulb if needed.

Reassemble the brake light assembly and interior trim panels, ensuring everything is properly secured. Test your new brake lights to ensure they work correctly. If your lights are still not functioning, you may want to inspect your wiring or consult a professional mechanic.

AD

Regularly maintaining your vehicle's lights not only ensures your safety but also helps avoid potential accidents. If you're unsure about any part of the process, don't hesitate to consult a professional. Happy wrenching!

AD