how to change brake light on 2014 ford escape

Steps to Replace Brake Light on 2014 Ford Escape

By Emily Lopez
AD

Is your 2014 Ford Escape signaling a potential safety hazard with its brake lights? Don't overlook this critical issue. Changing the brake light is a straightforward process that you can undertake yourself, saving you a trip to the mechanic. Let's dive into a step-by-step guide on how to replace the brake light on a 2014 Ford Escape.

Before we start, remember that safety is paramount when dealing with any vehicle maintenance. Ensure your vehicle is parked on a level surface and turned off. Allow the engine to cool down before you begin. Always consult your vehicle's owner's manual for specific instruction related to your Ford Escape.

Locating the Tail Light Assembly

First, let's identify the tail light assembly where the brake light is housed. The tail light assembly on a 2014 Ford Escape is located at the rear of the vehicle, on both the driver's and passenger's sides. It's integrated with the turn signal and reverse lights.

AD
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
Change a Brake Light
Change a Brake Light
How To Change A Brake Light Bulb In A Car - Ford Focus
How To Change A Brake Light Bulb In A Car - Ford Focus

Understanding the assembly's components will be beneficial. The tail light assembly comprises several parts such as the lens, which is the transparent cover, the reflector, which is the white or silver part that directs the light, and the light bulb, which is the source of illumination.

Preparation and Gathering Tools

Gather the necessary tools before you start. You'll need a flathead screwdriver, a socket wrench (10mm), a brake light bulb (preferably LED for longevity and efficiency), and a pair of work gloves for safety.

How to Replace a Brake or Tail Light in a Ford Explorer, Expedition, Excursion
How to Replace a Brake or Tail Light in a Ford Explorer, Expedition, Excursion

After gathering your tools, prepare your workspace. If your vehicle is dirty, clean the area around the tail lights to prevent dirt from getting into the assembly during the replacement.

Removing the Tail Light Assembly

Start by opening the rear hatch of your Escape. You might need to pull the hatch liner aside to expose the fasteners securing the tail light assembly. The assembly is secured by three 10mm bolts. Using your socket wrench, unscrew these bolts and carefully remove them.

AD

Once the bolts are removed, gently pull the tail light assembly away from the vehicle to disconnect it from the wiring harness. You should see the tail light bulb at the back of the assembly. There is a retaining clip or a spring that holds the bulb in place. Carefully release this clip or compress the spring to remove the bulb.

Replacing the Brake Light Bulb

Now that the old bulb is out, let's replace it with a new one. If you're replacing both brake lights, make sure to keep track of which bulb goes on which side to maintain the correct function of your turn signals.

Dedicated brake light bulbs are not typically available for purchase. Instead, you'll usually install a multi-function bulb that serves as both the brake light and the turn signal. In a 2014 Ford Escape, a #1157 bulb should do the trick. These bulbs can clip into place easily, so make sure it's fully seated before testing.

AD

Installing the New Bulb

Position the new bulb in place and push it gently until it clicks into position. Ensure the bulb is fully inserted and that its contacts are properly aligned with the electrical connectors on the wiring harness.

Before reassembling, test the new bulb to ensure it's working correctly. Have an assistant press the brake pedal while you observe the rear of the vehicle. If the new bulb illuminates, you've successfully replaced your brake light.

Reassembling the Tail Light Assembly

Once you've confirmed the new bulb is working, reinstall the tail light assembly. Make sure the electrical connectors are properly seated and the assembly is correctly aligned with the vehicle's body.

AD

Replace the three bolts and tighten them securely using your socket wrench. Ensure they're not overtightened to avoid stripping the threads. Once the bolts are secure, the tail light assembly is reinstalled.

Remember to test your brake lights again to ensure they're working correctly before driving. If everything is in order, congratulate yourself on a job well done—you've just saved yourself some money and kept your 2014 Ford Escape rolling safely!

AD