how to reset oil change light ford escape 2013

Reset Ford Escape 2013 Oil Change Light: Easy Steps

By Michael Walker
AD

Tackling the "Service Engine Soon" or "Oil Change" light illuminating on your 2013 Ford Escape's dashboard can be concerning, but often, it's a straightforward issue to address. This light typically indicates that your vehicle is due for an oil change, a crucial maintenance task that keeps your engine running smoothly. If you're a hands-on driver who prefers to reset the light yourself, we're here to guide you through the process using simple, step-by-step instructions.

Before we dive into resetting the light, let's briefly discuss why timing is crucial for oil changes. Regular oil changes remove contaminants and keep your engine clean, which prolongs its life and maintains your vehicle's fuel efficiency. Most vehicles, including your 2013 Ford Escape, require an oil change every 5,000 to 7,500 miles, depending on your driving conditions.

Preparing for the Oil Change

Before proceeding with the oil change and resetting the light, gather the necessary materials. You'll need high-quality motor oil that matches your vehicle's specifications, a new oil filter, a wrench or oil filter wrench, an oil pan or tray, an old towel or rags, and possibly a funnel. Ensure your Escape is parked on a level surface, and allow the engine to run for about 15 minutes to warm the oil, making it flow more easily during the change.

AD
Reset an Oil Change Light [Easy Steps for American-Made Vehicles]
Reset an Oil Change Light [Easy Steps for American-Made Vehicles]
How to Reset the Oil Change Light in a Car
How to Reset the Oil Change Light in a Car
HOW TO RESET FORD TPMS LIGHT
HOW TO RESET FORD TPMS LIGHT

Now, let's discuss the oil change process itself. While you might be eager to reset the light, it's crucial to follow these steps to maintain your vehicle's health and safety.

Draining the Old Oil

Begin by locating the oil pan underneath your vehicle. Place your oil pan or tray below and remove the oil pan's filler cap, which also serves as the oil drain plug. This will allow the old oil to drain completely. It may take several minutes for all the oil to empty from the pan. Be patient and ensure you've collected all the oil to avoid creating a mess and contaminating the environment.

How to Reset the Oil Life on a 2013 Ford Explorer
How to Reset the Oil Life on a 2013 Ford Explorer
Ford Kuga Workshop Manual EWD
Ford Kuga Workshop Manual EWD

Replacing the Oil Filter

Once the oil has finished draining, unscrew the old oil filter from the engine using your wrench or oil filter wrench. Before installing the new oil filter, smear a small amount of new oil around the gasket to create a proper seal. Screw the new oil filter into place by hand, turning it approximately ¾ to 1 ¼ turns clockwise. Consult your owner's manual for the precise torquing specifications for your Ford Escape.

With the oil filter replaced, it's time to refill your engine with new oil. Locate the oil fill hole on top of your engine and remove the cap. Using a funnel, pour the specified amount of motor oil into the engine, ensuring you match the grade and quantity listed in your vehicle's maintenance schedule or owner's manual. Allow the oil to settle for a few minutes before checking the dipstick to confirm you've added the correct amount.

AD

Re-insert and tighten the oil drain plug by hand, using the appropriate torque specification as outlined in your owner's manual. Now that the oil change is complete, let the engine run for a few minutes to circulate the new oil throughout the system.

Resetting the Service Engine Soon Light

After successfully completing the oil change, you're ready to reset the "Service Engine Soon" or "Oil Change" light on your 2013 Ford Escape. Resetting the light is a breeze, thanks to the vehicle's onboard computer. Follow these simple steps, and you'll be back on the road in no time:

With the ignition in the "ON" position but the engine off, press and hold the "TRIP ODOMETER RESET" button on your dashboard for about 10-20 seconds. While still holding the button, turn the ignition to the "START" position without cranking the engine. Continue to press and hold the "TRIP ODOMETER RESET" button for an additional 10-20 seconds. Release the button, and the "Service Engine Soon" or "Oil Change" light should turn off.

AD

Confirming the Reset

To ensure the light has been successfully reset, start your engine and let it run for a few minutes.Monitor the instrument cluster for any warning messages or indicators. If the light has been reset correctly, it should remain off, and you shouldn't see any further messages. If the light persists or new messages appear, consult your owner's manual or seek professional assistance.

Remember, resetting the "Service Engine Soon" or "Oil Change" light does not postpone the next required oil change. Keep track of your vehicle's maintenance history, and make sure to perform regular oil changes to keep your 2013 Ford Escape running smoothly and efficiently. Happy driving!

AD