how to change blades on a riding mower

Step-by-Step Guide: How to Change Blades on a Riding Mower

By Christopher Martin
AD

Regular upkeep of your riding mower is essential to ensure it operates efficiently and safely. One of the crucial maintenance tasks is replacing the blades, which typically need to be changed annually or every 25 hours of operation, depending on the frequency of use and terrain. Here's a comprehensive step-by-step guide on how to change blades on a riding mower.

Before we begin, ensure you have the right equipment. You'll need a new blade set (compatible with your mower model), a socket wrench, a blade removal tool, and possibly a hammer. Always remember to disengage the blades and let the engine cool down before starting the procedure to prevent injuries.

Preparation and Safety Measures

Before attempting to change the blades, it's crucial to take safety precautions. This includes ensuring the mower is on a level surface and the blades are disengaged. Also, disconnect the spark plug wire to prevent accidental start-ups.

AD
How to Change the Blades on a Riding Mower
How to Change the Blades on a Riding Mower
how to change the blades on a zero turn mower or riding mower
how to change the blades on a zero turn mower or riding mower
a red lawn mower sitting in front of a garage with the words change your blades
a red lawn mower sitting in front of a garage with the words change your blades

It's recommended to have an extra set of hands during this process, as mower blades can be heavy and awkward to handle. Always wear safety glasses and gloves to protect yourself from potential hazards.

Accessing the Blades

There are typically two types of blade mounting systems: a single bolt mount or a dual bolt mount. Identify the type of mount on your mower to proceed with the correct procedure.

Changing Blades on Zero Turn Mower ! Badboy Craftsman Ariens #larrysbrusch
Changing Blades on Zero Turn Mower ! Badboy Craftsman Ariens #larrysbrusch

For single bolt mounts, you'll need to remove the dome-shaped blade retainer. Using a socket wrench, loosen and remove the retaining bolt. For dual bolt mounts, use a socket wrench to loosen and remove both bolts.

Removing the Old Blades

Once the bolts are removed, use a blade removal tool (or a screwdriver and a hammer) to carefully lift the old blade off the spindle. Be extra cautious, as the blade might still be sharp and could cause injury.

AD

If the blade is stuck, you can use a pry bar or a large screwdriver to gently tap it loose. After removing the blade, clean any debris from the spindle to avoid damage to the new blade.

Installing the New Blades

Before installation, ensure the new blades are correctly aligned. The balance point, usually marked with a 'B,' should be at the 12 o'clock position. If it's not, gently bend the blade until it is. Be careful not to over-bend the blade.

Measure the bolt hole on the new blade to ensure it matches your mower's spindle. If it doesn't, you might need to drill out the hole slightly to fit the blade. Always test fit the blade before fully installing to save time and effort.

AD

Securing the New Blades

Place the new blade onto the spindle with the cutting edge facing down. For single bolt mounts, place the blade retainer back onto the spindle followed by the washer and bolt. Hand tighten the bolt, then use the socket wrench to snug it down.

For dual bolt mounts, slip the blade onto the spindle. Place the washer and bolt into each side of the blade, then hand tighten them. Using the torque specifications given in your owner's manual, snug down the bolts using a socket wrench. Be careful not to overtighten.

Final Inspection and Testing

After securing the new blades, perform a final check to ensure everything is tight and secure. Check the alignment of each blade, ensuring they are balanced and parallel to each other.

AD

Start your mower and test the new blades, making sure they rotate smoothly and without any unusual noises. If everything checks out, you're ready to continue mowing your lawn with confidence in your mower's efficiency and safety.

Happy mowing, and remember, regular maintenance is the key to a long and productive life for your riding mower!

AD