how to change blades on john deere riding mower

Step-by-Step: Change Blades on John Deere Riding Mower

By Joseph Jones
AD

When it comes to maintaining the performance of your John Deere riding mower, regular blade changes are a must. Over time, your mower blades can become dull or damaged, affecting the quality of your cuts and potentially causing damage to your lawn. Here's a comprehensive guide on how to change blades on your John Deere riding mower safely and effectively, ensuring peak performance and a healthy, well-maintained lawn.

Before we dive into the step-by-step process, it's important to note that this guide applies to most John Deere riding mowers. However, if you're unsure about any step or have a specific model, always consult your owner's manual or a John Deere professional for advice tailored to your machine.

Preparation and Safety Measures

Before you begin, it's crucial to take some safety precautions to prevent any injuries or damage. Always disconnect the spark plug wire to prevent the engine from starting unexpectedly. Additionally, put a block under the rear wheels to keep the mower from rolling while you're working on it.

AD
How to Change the Blades on a Riding Mower
How to Change the Blades on a Riding Mower
How to Change John Deere E160 Mower Blades and Remove Deck
How to Change John Deere E160 Mower Blades and Remove Deck
How to Change Mower Blades on your John Deere S100 Lawn Tractor 42
How to Change Mower Blades on your John Deere S100 Lawn Tractor 42

Once you've taken these safety measures, gather your tools. You'll need a breaker bar, sockets, and a wheel dolly (optional, but helpful for-major blade changes). Also, make sure you have the correct replacement blades for your John Deere riding mower. Your owner's manual should provide this information.

Removing the Old Blades

First, tip your mower deck back using the lift lever and support it with a block of wood or a brick to access the blades. Next, using your breaker bar and the appropriate socket, loosen the nut that secures the blade to the spindle, then remove the nut completely.

John Deere Mower Blades Replacement; WITHOUT A JACK!!
John Deere Mower Blades Replacement; WITHOUT A JACK!!

Now, slide the blade off the spindle and onto a flat surface. You might need to use some force, but be careful not to damage the spindle or blade. If you're having difficulty, use your wheel dolly to gently raise the mower deck and provide more leverage.

Inspecting the Spindle

With the blade removed, take this opportunity to inspect the spindle for any signs of wear or damage. If you find any issues, replace the spindle before installing the new blade. A damaged spindle can cause uneven cuts and potentially lead to larger problems down the line.

AD

Once you're confident the spindle is in good working order, proceed to the next step. If you did encounter any issues, consult your owner's manual or a professional for advice on replacement and the appropriate tools needed.

Installing the New Blades

Start by slide the new blade onto the spindle, ensuring the arrow on the blade points in the direction of rotation. This is typically indicated by an 'UP' or 'FORWARD' marking on the blade or the spindle.

Once the blade is securely on the spindle, replace the nut and tighten it using your breaker bar and socket. Do not overtighten the nut, as this can cause damage to the spindle or blade. Consult your owner's manual for the recommended torque specifications.

AD

Securing the Blade

After tightening the nut, use your socket and breaker bar to secure the blade in place. You may need to resort to a higher socket size to achieve the proper torque. Again, consult your owner's manual for the correct specifications to avoid over-tightening and potential damage.

With the blade securely in place, remove the block of wood or brick you used to support the mower deck and lower it back into its original position. Ensure that the mower deck sits flush with the ground and that the blades are parallel to the ground.

Testing the New Blades

Before you start mowing, give your new blades a test run in a clear, open area to ensure they're spinning freely and cutting evenly. Listen for any unusual noises, and watch for any wobbling or uneven cutting. If you notice any issues, double-check your installation and blade alignment, and consult your owner's manual or a professional if necessary.

AD

If your blades pass the test, you're ready to get back to mowing with confidence, knowing your John Deere riding mower is equipped with sharp, well-maintained blades that will keep your lawn looking its best.

Regular blade changes are a vital part of maintaining your John Deere riding mower and ensuring a healthy lawn. By following this comprehensive guide, you're well on your way to keeping your mower running smoothly and your lawn looking lush. So, the next time you notice your mower's cuts aren't as clean as they used to be, don't hesitate to change those blades and get back to enjoying your perfect lawn.

AD