how to change battery in ford explorer key fob

Step-by-Step Guide: How to Change Battery in Ford Explorer Key Fob

By Hannah White
AD

Has your Ford Explorer's key fob conked out, leaving you locked out or unable to start your vehicle? It might be time to replace its battery. Don't worry, this task is quite manageable and doesn't require a mechanic. Let's dive into the step-by-step process of how to change the battery in your Ford Explorer's key fob.

First, gather your materials: a new CR2032 battery (which you can find at most electronics stores or online), and a small, flat tool like a coin or an overhang pry tool to help remove the key fob's back cover.

Understanding Your Ford Explorer's Key Fob

The Ford Explorer's key fob is designed to provide convenience, security, and durability, but like any battery-powered device, it can run out of juice. The key fob's battery life typically lasts between 3 to 4 years. However, factors like frequent use, extreme temperatures, and even the vehicle's proximity to the key fob can decrease battery life.

AD
How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
How to Replace A Ford Smart Key Battery - Expedition Edge Escape Explorer Remote Fob - Change Remove
How to Replace A Ford Smart Key Battery - Expedition Edge Escape Explorer Remote Fob - Change Remove
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet

Before you proceed with the replacement, ensure that the issue is indeed a dead battery and not a faulty key fob. Try replacing the battery in your existing key fob with a new one. If the new battery works in your current key fob, then you're good to go. If not, you might need to consider purchasing a new key fob.

Identifying If Your Key Fob Needs a Battery Replacement

While the key fob's low battery indicator light should remind you to replace the battery, it's not always reliable. Here are some signs that your Ford Explorer's key fob battery might be dying:

Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco
Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge
  • Buttons don't respond consistently or at all.
  • Your vehicle doesn't lock or unlock as expected, even if you're within range.
  • The battery indicator light on your key fob stays lit or blinks consistently.

Choosing the Right Battery

Ford Explorer key fobs use a CR2032 battery. This is a 3V lithium coin cell battery with a diameter of 20mm and a height of 3.2mm. You can find these batteries in most electronics stores or online. Make sure you're purchasing the genuine CR2032, asoffshoots like CR2016 or CR2025 may not fit or function correctly.

Ensure that you're buying a genuine CR2032 battery, as some lower-quality brands may not last as long or provide the necessary voltage. Opt for reputable brands like Duracell, Energizer, or Panasonic.

AD

Replacing the Battery in Your Ford Explorer's Key Fob

Now that you've gathered your tools and materials, let's get into the nitty-gritty of replacing the battery in your Ford Explorer's key fob. This process should take just a few minutes.

If you're new to this, don't worry. With a little patience and this step-by-step guide, you'll have your Ford Explorer back on the road in no time.

Removing the Old Battery

Removing the old battery is straightforward. Here's how:

AD
  1. Identify the battery compartment on your key fob. It's usually on the back, covered by a small plastic or metal panel.
  2. Use your flat tool to pry the battery compartment cover off. Insert the tool into the small gap and gently lever it to loosen the panel. Avoid using excessive force to prevent damage to the key fob.
  3. Carefully remove the compartment cover. You'll now see the battery, which is held in place by a small retaining clip.
  4. Release the battery from the retaining clip by gently pressing the clip with your tool. This should pop the battery out. If it doesn't, try prying it from the other side.

Inserting the New Battery

With the old battery out, it's now time to insert the new one.

  1. Orient the new CR2032 battery correctly. The positive side (marked with a "+" or a "P") should face up.
  2. Position the battery against the battery compartment and align the positive side with the metal contacts.
  3. Press the battery into the compartment. You might hear a click as it locks into place.
  4. Replace the battery compartment cover and snap it back into place.

Testing Your New Battery

Before you put your key fob away, make sure the new battery's working correctly.

  • Test your key fob's functions, such as locking, unlocking, and starting your Ford Explorer.
  • Check that the battery indicator light is no longer lit or blinking.
  • Try using the key fob at different distances from your vehicle to ensure it's working within its typical range.

If everything's working as it should, great! You've just successfully replaced the battery in your Ford Explorer's key fob. But remember, batteries degrade over time and usage, so keep an eye on its performance and don't hesitate to replace it when necessary.

AD

Now that you know how to change the battery in your Ford Explorer's key fob, you can tackle this quick fix whenever needed, saving yourself time and money. Happy driving!

AD